Table of Contents
Advertisement
Note
• When "YUV" is selected in "Input Color Format", the setting is automatically set to "Limited".
Additionally, when "Auto" is selected and the monitor determines the input color format to be
YUV, the setting is automatically set to "Limited".
Analog Adjustment - Auto Screen Adjust
Screen flicker, display position and size and be automatically adjusted. When you select
"Auto Screen Adjust", a message will appear. Select "Yes".
Note
• The automatic screen adjustment function will operate correctly if an image is displayed in the
entire displayable area of the screen. It will not operate correctly in the following cases:
– When an image is displayed in only part of a screen like the command prompt
– When black is used in the background, such as a wallpaper
Also, when the function may not work correctly in part of the graphics board
• When a signal is input to the monitor for the first time, or when the resolution or horizontal/
vertical scan frequency is changed to one that had not been displayed before, it is automatically
adjusted (signals with a resolution of 800 x 600 (SVGA) or above).
Analog Adjustment - Auto Range Adjust
The signal output level can be automatically adjusted to enable display of all color
gradations (0 to 255). When you select "Auto Range Adjust", a message will appear. Select
"Yes".
Analog Adjustment - Clock
Flickering of vertical lines or part of the screen can be minimized.
Note
• It is easy to overlook the point where the setting is suitable, so please finely adjust.
Analog Adjustment - Phase
Flickering or bleeding of the screen as a whole can be minimized.
Note
• Flickering or bleeding may not fully disappear, depending on the PC and graphics board you are
using.
• If vertical stripes appear on the screen after completing the setting, adjust "Clock" again.
Advanced Adjustment / Setting | 3
11
Advertisement
Table of Contents
