TP-Link Omada EAP615 User Manual page 33

Encryption
RADIUS Server IP
RADIUS Port
RADIUS Password
RADIUS Accounting
Accounting Server IP
Accounting Server
Port
Accounting Server
Password
Interim Update
Interim Update
Interval
Group Key Update
Period
Select the Encryption type. Note that some encryption type is only
available under certain circumstances.
Auto: The default setting is Auto and the EAP will select TKIP or AES
automatically based on the client device's request.
TKIP: Temporal Key Integrity Protocol. TKIP is not supported in
802.11n mode, 802.11ac mode or 802.11n/ac mixed mode. If TKIP is
applied in 802.11n, 802.11 ac or 802.11n/ac mixed mode, the clients
may not be able to access the wireless network. If TKIP is applied in
11b/g/n mode (2.4GHz) or 11a/n mode(5GHz), the device may work at
a low transmission rate.
AES: Advanced Encryption Standard. It is securer than TKIP.
Enter the IP address of the RADIUS Server.
Enter the port number of the RADIUS Server.
Enter the shared secret key of the RADIUS server.
Enable or disable RADIUS accounting feature.
Enter the IP address of the accounting server.
Enter the port number of the accounting server.
Enter the shared secret key of the accounting server.
With this option enabled, you can specify the duration between
accounting information updates. By default, the function is disabled.
Enter the appropriate duration between updates for EAPs in Interim
Update Interval.
With Interim Update enabled, specify the appropriate duration
between updates for EAPs. The default duration is 600 seconds.
Specify an update period of the encryption key. The update period
instructs how often the EAP should change the encryption key. 0
means that the encryption key does not change at anytime.
29