TP-Link Omada EAP615 User Manual page 51

the clients can visit the login page provided by the web portal server and then pass the
subsequent authentication process.
Follow the steps below to add free authentication policy.
1. In the Free Authentication Policy section, click
2. Configure the following parameters. When all the configured conditions are met, the
client can access the network without authentication.
Policy Name
Source IP Range
Destination IP
Range
Source MAC
Address
Specify a name for the policy.
Specify an IP range with the subnet and mask length. The clients in this
IP range can access the network without authentication.
Leaving the field empty means that clients with any IP address can
access the specific resources.
Specify an IP range with the subnet and mask length. The devices in
this IP range can be accessed by the clients without authentication.
Leaving the field empty means that all devices in the LAN can be
accessed by the specific clients.
Specify the MAC address of the client, who can access the specific
resources without authentication.
Leaving the field empty means that clients with any MAC address can
access the specific resources.
47
to load the following page.