Technical Data; Charging Time - Parkside PKHAP 20-Li B2 Original Instructions Manual

CY
GB

Technical data

Cordless
Hammer Drill ..........PKHAP 20-Li B2
Motor voltage U ..........................20 V
No load speed n
0
Mode 1 ............................ 0 - 660 rpm
Mode 2 ............................ 0 - 950 rpm
Impact rate
Mode 1 ......................... 0 - 3265 bpm
Mode 2 ......................... 0 - 4700 bpm
Impact energy ............................. 3 joule
Weight (without battery) ..............2.84 kg
Drilling capacity
in concrete/stone .............. max. 24 mm
in wood ........................... max. 27 mm
in metal ........................... max. 13 mm
Sound pressure level
(L ) ....................... 98.3 dB, K
pA
Sound power level
(L ) ....................109.3 dB; K
WA
Vibration on handle
(a ).............................. 10.072 m/s
h,HD
(a ) ............................... 8.92 m/s
h,CHeq
...................................... K= 1.5 m/s
Vibration on auxiliary handle
(a ).............................. 19.408 m/s
h,HD
(a ) ............................. 14.88 m/s
h,CHeq
...................................... K= 1.5 m/s
Temperature...........................max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band .....2400 - 2483.5 MHz
Max. transmission power ....... ≤ 20 dBm
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
6
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
= 3 dB
pA

Charging time

= 3 dB
WA
The device is part of the Parkside X 20 V
2
TEAM series and can be operated with
2
batteries of the Parkside X 20 V TEAM
2
series.
Batteries of the Parkside X 20 V TEAM
2
2 series may only be charged using chargers
of the Parkside X 20 V TEAM series.
2
We recommend that you operate this appli-
ance with the following batteries only:
PAP 20 B1, PAP 20 B3,
Smart PAPS 204 A1, Smart PAPS 208 A1.
We recommend charging these batteries
with the following chargers:
PLG 20 A3, PLG 20 C3, PDSLG 20 A1,
PLG 20 A4, PLG 20 C1,
Smart PLGS 2012 A1.
An up-to-date list of battery compatibility
can be found at: www.lidl.de/akku
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. An example
of how to reduce vibration exposure
is limiting the working hours. For this
purpose all parts of the operating
cycle have to be considered (for ex-
ample, times when the electric tool
is switched off and times when it is
switched on but running without any
load).