Subscribe to Our Youtube Channel
Related Manuals for METREL A 1560
Summary of Contents for METREL A 1560
- Page 1 METREL test and measurement accessories Burn Link Adapter A 1560 Instruction manual Version 1.1.2, Code no. 20 752 614 Autorisierter Distributor...
- Page 2 Mark on your equipment certifies that this equipment meets the requirements of the all applicable EU (European Union) regulations © 2016 METREL No part of this publication may be reproduced or utilized in any form or by any means without permission in writing from METREL.
-
Page 3: Table Of Contents
A 1560 Burn Link Adapter Table of contents Table of contents PREFACE ....................... 1 SAFETY AND OPERATIONAL CONSIDERATIONS..........2 ..................2 ARNINGS AND NOTE A 1560 .................. 3 ARKINGS ON THE .................... 3 TANDARD APPLIED A 1560 DESCRIPTION ................... 4 A 1560 OPERATION .................... -
Page 4: Preface
A 1560 Burn Link Adapter is special accessory intended for using only with METREL withstanding voltage testers like MI 3394. -
Page 5: Safety And Operational Considerations
dangerous for the operator, for test equipment or for the tested object! If the A 1560 is used in a manner not specified in this user manual or the manual of target test equipment, the protection provided by the A 1560 and... -
Page 6: Markings On Thea 1560
EMC, LVD, and ROHS regulations. This equipment should be recycled as electronic waste. 2.3 Standards applied The A 1560 Burn Link Adapter is manufactured and tested according to the following standards, listed below. Safety (LVD) Safety requirements for electrical equipment for measurement, control, and laboratory use –... -
Page 7: 1560 Description
Figure 3.1: A 1560 parts Legend: High voltage plug connector for connection on withstanding voltage tester. Burn Link Adapter case. Burn Link socket connector for standard METREL withstanding voltage test probe, supplied by master instrument. Intermittent operation requirements. Warnings! Maximum rated voltage to ground is 5000 V, secondary type! ... -
Page 8: 1560 Operation
A 1560 Burn Link Adapter A 1560 operation 4 A 1560 operation Connect the A 1560 Burn Link Adapter plug connector (1) to the master instrument HV output. Connect HV test probe to A 1560 Burn Link Adapter socket connector (3). -
Page 9: Maintenance
A 1560 Burn Test Adapter. 5.1 Cleaning No special maintenance is required for the housing. To clean the surface of the A 1560 Burn Test Adapter use a soft cloth slightly moistened with soapy water or alcohol. Then leave the A 1560 to dry totally before use. -
Page 10: Technical Specifications
A 1560 Burn Link Adapter Technical specifications 6 Technical specifications 6.1 General data Rated input voltage ......5000 V Output short circuit current ....30 mA typ. at 5000 V Rated continuous power dissipation ..25 W Loading requirements: Intermittent operation is required with test voltages higher than 2200 V.
Need help?
Do you have a question about the A 1560 and is the answer not in the manual?
Questions and answers