Elatec MULTITECH 2 M HF User Manual page 6

Maintenance and cleaning
•
Any repair or maintenance work should be done by a trained and qualified personnel only.
Do not try to repair or carry out any maintenance work on the product by yourself.
Do not allow any repair or maintenance work on the product by an unqualified or unauthorized third party.
•
The product does not need any special cleaning.
Do not use any detergents or other cleaning agents on the product.
Disposal
•
The product must be disposed of in accordance with the EU directive on waste electrical and electronic equipment (WEEE) or any
applicable local regulations.
Product modifications
•
The product has been designed, manufactured and certified as defined by ELATEC.
Any product modification without prior written approval from ELATEC is prohibited and considered improper use of the
product. Unauthorized product modifications may also result in the loss of product certifications.
If you are unsure about any part of the safety information above, contact ELATEC support.
Any failure to comply with the safety information given in this document is considered improper use. ELATEC excludes any
liability in case of improper use or faulty product installation.
© 2023 ELATEC GmbH – TWN4 MultiTech 2 M HF user manual – DocRev03 – EN – 07/2023 Page 6 of 14