Assembly Instructions - Dyna-Glo M365GMDG14 Manual

ASSEMBLY INSTRUCTIONS

1. Assemble the casters, including 2 directional
casters (B), 1 non-locking swivel caster (C),
1 locking swivel caster (D), onto bottom shelf
(A) with 4 M6 screw (AA), plain washer (BB)
and spring washer (CC) for each caster as
shown.
Hardware Used
AA
M6x12 Screw
Plain
BB
Washer
Spring
CC
Washer
2. Insert 4 screws (AA) into holes in bottom shelf
(A), leaving 4-6mm clearance from screw head
to bottom shelf (A). Attach cart left side
panel (E) by placing the panel keyhole over
the screw heads (AA) on the left side of the
bottom shelf (A) and sliding the cart left side
panel (E) so that the screw head is over the
smaller part of keyhole. Thread the screw (AA)
down snug but do not tighten at this step.
Repeat with cart right side panel (F).
Hardware Used
M6x12 Screw
AA
1
B
x 16
x 16
x 16
2
E
x 4
7
C
AA
A
CC
BB
F
E
D
A