Table of Contents
Advertisement
5-Burner LP Gas GriLL
with siDe Burner anD
searPLus™ Burner
Model #DGH485CRP/DGH485CRP-D
Questions, problems, missing parts?
Before returning to your retailer,
call our customer service
department at 1-877-447-4768,
8:00 a.m. – 4:30 p.m., CST,
Monday – Friday or e-mail us at
Customerservice@ghpgroupinc.com
061719
Advertisement
Table of Contents
Related Manuals for Dyna-Glo DGH485CRP
Summary of Contents for Dyna-Glo DGH485CRP
- Page 1 5-Burner LP Gas GriLL with siDe Burner anD searPLus™ Burner Model #DGH485CRP/DGH485CRP-D Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m., CST, Monday – Friday or e-mail us at Customerservice@ghpgroupinc.com...
- Page 2 table Of Contents safety information ........................3 Package Contents ........................5 hardware Contents ........................6 Preparation ..........................6 assembly instructions ......................7 Operation instructions ......................18 Care and Maintenance ......................23 troubleshooting ........................26 Limited warranty ........................27 replacement Parts List......................28 Assembler/Installer: This manual contains important information necessary for the proper assembly and safe use of this appliance.
- Page 3 safety information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at: 1-877-447- 4768, 8:00 a.m. – 4:30 p.m., CST, Monday – Friday. DanGer • Do not use in an explosive atmosphere. Keep grill area clear and free from combustible materials, gasoline and other flammable vapors and liquids.
- Page 4 safety information warninG • Do not place the grill under overhead combustible construction or awnings. Minimum clearance from sides and back of unit to combustible construction, 36 36in inches (914.4mm) from sides and back. 914.4mm 36in 36in 914.4mm 914.4mm NOTE: The installation must conform with 36in 914.4mm local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural...
- Page 5 assembly instructions assembly – Bottom Panels assembly – right side and rear Panels...
- Page 6 assembly – rear Panel assembly – Left side and rear Panels...
- Page 7 assembly – Casters Wrench assembly - Cylinder exclusion...
- Page 8 assembly – upper Brace and Cabinet Magnet assembly – Doors...
- Page 9 assembly – handle, Knobs, and temperature Gauge assembly – Grill Body to Base CautiOn: 2 people required for safe assembly. note: Fully tighten all screws at this time.
- Page 10 assembly - Left side table and Condiment tray rear shown, same for front 5 threads rear shown, same for front slot same for other side slot...
- Page 11 assembly – right side shelf rear shown, same for front 5 threads rear shown, same for front engage slots and tighten 5 threads screws...
- Page 12 assembly – side Burner...
- Page 13 assembly – Optional smoker Box smoker Box Placement assembly – heat tents...
- Page 14 assembly – rack and Cooking Grates assembly – Grease Pan and Grease Cup...
- Page 15 assembly – Propane Cylinder hose access hole regulator connector tank Connector...
- Page 16 Operation instructions CheCKinG FOr LeaKs After all connections are made, check all connections and fittings on the LP gas tank valve, gas hose and regulator for leaks with a water and soap solution. To prevent fire or explosion while testing for a leak: • Always perform leak test prior to lighting the grill. • Do not smoke while testing for a leak.
Need help?
Do you have a question about the DGH485CRP and is the answer not in the manual?
Questions and answers