Technical Data; Customer Care And Service; Eng - Hyundai FSB 050 WW8E Instruction Manual

Problem
The food is too warm.
Appliance cools too much Temperature is set too cold.
Unusual noises
Side panel is hot
If the malfunction shows again, contact the Service Center.

TECHNICAL DATA

• Technical information can be found on the type plate inside the appliance (or on its back
side) and on the energy label.
• "Information Sheet" and "Directions for Use" can be downloaded at:
www.hyundai-electronics.cz.
• QR code on the energy label supplied with the appliance provides a web link to information
concerning the specification of this appliance in the EU EPREL database.
• Keep the energy label together with user manual and all other documentation supplied with
this appliance.
• The same information in the EPREL database can also be found at:
https: //eprel.ec.europa.eu
• The model name (product number) can be found on the type plate of the appliance and also
on the energy label supplied with the appliance.
• We reserve the right to change technical specifications.

CUSTOMER CARE AND SERVICE

• Always use original spare parts.
• When contacting our authorised service or information line, make sure you have the
following information available: the model name (product number) and serial number (SN).
• This information can be found on the type plate (or on a separate label near it).
• The manufacturer reserves the right for change without prior notice.
• Original spare parts for particular selected components of the product are available at least
7 or 10 years from the launch of the last piece of the appliance on the market (depending on
the type of the component).
• The manufacturer provides standard legal warranty for the appliance for a period of 24
months.
• For more information regarding service and purchase of spare parts, visit our website:
www.etasince1943.com/support
Possible cause
Temperature is not properly
adjusted.
Door was open for an extended
period.
A large quantity of warm food was
placed in the appliance within the
last 24 hours.
The appliance is near a heat
source.
Appliance is not level.
The appliance is touching the wall
or other objects.
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or
the wall.
Condenser is inside the panel.

ENG - 46

Solution
Please look in the initial
Temperature Setting section.
Open the door only as long as
necessary.
Turn the temperature
regulation to a colder setting
temporarily.
Please look in the installation
location section.
Turn the temperature
regulation knob to a warmer
setting temporarily.
Re-adjust the feet.
Move the appliance slightly.
If necessary, carefully bend the
component out of the way.
It's normal.
ENG