Bosch Professional GIC 12V-5-27 C Original Instructions Manual page 35

Errors – causes and corrective measures
Error indicator Cause
in the display
Internal memory al-
most full
(yellow warning)
Internal memory full Delete the files from the internal memory or in-
Error in the internal
memory
(red warning)
Micro-SD card al-
most full
SD
SD
(yellow warning)
Micro-SD card full
Error in the micro-
SD
SD
SD card
(red warning)
Maintenance and Service
Maintenance and Cleaning
Do not immerse the handheld device (13) in water or other liquids.
Always keep the inspection camera clean. Clean the inspection camera and all accessor-
ies particularly thoroughly after you have worked in areas with substances harmful to
health.
Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.
Clean the camera lens (4) in particular regularly and make sure to check for any lint.
Bosch Power Tools
Corrective measures
Delete the files from the internal memory or in-
sert a micro-SD card (20).
sert a micro-SD card (20).
Restart the inspection camera.
If the problem persists, contact an authorised
Bosch after-sales service centre.
Delete the files from the micro-SD card (20).
Delete the files from the micro-SD card (20).
Remove the micro-SD card (20) and insert it
again.
Check the micro-SD card in a different device.
1 609 92A 89L | (17.03.2023)
English | 35