Table of Contents
Advertisement
SMALL INNER DOOR (OPTION)
There is an option of the small inner door (MDF-7ID or MDF-5ID) in this product. A chamber can be
divided when the small inner door to MDF-7ID (for MDF-U74V) or MDF-5ID (for MDF-U54V). Refer to an
attached installation manual for the installation of MDF-7ID/MDF-5ID.
Note:
A cooling performance progresses when the small inner door (MDF-7ID or MDF-5ID) is used. (Page
38 "PERFORMANCE").
Cooling performance : -82
Set it up by more than +5℃ to the lowest set temperature when the use in a long time.
An optional inventory rack IR-224U cannot be used when an small inner door is installed.
DRAWER RACK (OPTION)
An optional drawer rack (MDF-50R) is applicable to the lower chamber of MDF-U54V. By using the
drawer rack, the materials can be stored in the chamber efficiently. For the installation of the drawer rack,
refer to the instruction enclosed with the drawer rack.
INTERFACE BOARD (OPTION)
Installation of MTR-480/MTR-L03
Contact our sales representative or agent for the attachment of a interface board. :
Note:
• When a data transmitting function to the personal computer is done, an interface board MTR-480 (option
goods) and communication cable of 9 pin Dsub cross type for RS232C are necessary.
• The connecting cable between the PC and MTR-L03 terminal is not enclosed. Provide a cross type
cable of less than 100 m length having a pin plug.
o
C at the center of the chamber (ambient temperature; 30
34
o
C, no load)
Advertisement
Table of Contents
