Mitsubishi Electric FR-E720-008 Instruction Manual page 77

Parameter list
Func-
Parameter Name
tion
990 PU buzzer control
991 PU contrast adjustment
Pr.CL Parameter clear
ALLC All parameter clear
Er.CL Faults history clear
Pr.CH Initial value change list
∗1
Differ according to capacities.
6%: FR-E720-050(SC) or less, FR-E740-026(SC) or less, FR-E720S-050 or less, FR-E710W-050 or less
4%: FR-E720-080(SC) to175(SC), FR-E740-040(SC) to 095(SC), FR-E720S-080 and 110
3%: FR-E720-240(SC) and 330(SC), FR-E740-120(SC) and 170(SC)
2%: FR-E720-470(SC) and 600(SC), FR-E740-230(SC) and 300(SC)
∗2
Differ according to capacities.
5s: FR-E720-175(SC) or less, FR-E740-095(SC) or less, FR-E720S-110 or less, FR-E710W-050 or less
10s: FR-E720-240(SC) and 330(SC), FR-E740-120(SC) and 170(SC)
15s: FR-E720-470(SC) and 600(SC), FR-E740-230(SC) and 300(SC)
∗3 Differ according to capacities.
6%: FR-E720-008(SC) and 015(SC), FR-E720S-008 and 015, FR-E710W-008 and 015
4%: FR-E720-030(SC) to 330(SC), FR-E740-016(SC) to 170(SC), FR-E720S-030 to 110, FR-E710W-030 and 050
2%: FR-E720-470(SC) and 600(SC), FR-E740-230(SC) and 300(SC)
∗4 Write is disabled in the communication mode (Network operation mode) from the PU connector.
∗5 The initial value differs according to the voltage class. (100V, 200V class/400V class)
∗6 The range differs according to the Pr. 71 setting.
∗7
Theses parameters can be set only in the safety stop function model.
∗8
The parameter number in parentheses is the one for use with the operation panel (PA02) for the FR-E500 series or parameter unit (FR-PU04/FR-PU07).
∗9 These parameters are communication parameters that are not cleared when parameter clear (all clear) is executed from RS-485 communication. (Refer to
page 213 for RS-485 communication).
∗10 When a communication option is installed, parameter clear (lock release) during password lock (Pr. 297 ≠ 9999) can be performed only from the
communication option.
∗11 Available only for the three-phase power input model.
76
Minimum Refer
Initial
Setting Range Setting to
Value
Increments Page
0, 1 1 1 275
0 to 63 1 58 275
0, 1 1 0 276
0, 1 1 0 276
0, 1 1 0
278
— — — 277
Customer
Parameter Remarks
Setting
990
991
Pr.CL
ALLC
Er.CL
Pr.CH
Control Mode-based
Instruction Code
Correspondence Table
Read Write Extended
V/F V/F V/F AD MFVC AD MFVC AD MFVC GP MFVC GP MFVC GP MFVC
5A DA 9
5B DB 9
— FC — — — —
— FC — — — —
— F4 — — — —
— — — — — —
Parameter list
Parameter
Copy Clear All clear
×
— — —
— — —
— — —
— — —
4