Puls FPS300.245-049-112 Manual

G
ENERAL DESCRIPTION
The FPS300 is an industrial grade power supply for the
1-phase mains system, it is incorporated into a rugged
wall-mount housing with an
protection.
It provides two to four stabilized outputs that are
galvanically separated from the input. The negative
potential of the outputs is permanently connected to
PE within the unit.
The most outstanding features of the FPS series are the
compact size, the wide operating temperature range,
the extremely low input inrush current and the very
high efficiencies, which are achieved through various
design technologies. Large output capacitors can
absorb and store regenerative energy from breaking
motors.
High immunity to transients and power surges as well as
low electromagnetic emissions and an international
approval package make it possible for nearly every
application. The various connector options support the
different needs of individual applications. Please contact
PULS for possible options.
O
RDER NUMBERS
Description:
Order Number
FPS300.245-049-112*
Accessories:
Related Products
*For DIN rail mounting PSU: (Order Number)D
e.g. FP300.245-049-112D
All parameters are specified at 24V, 12.5A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
Aug. 2023 / Rev. 1.0 DS- FPS300.245-049-112-EN
IP65/67 degree of
Power supply FPS300
Input Output
7/8" 3pin 7/8" 4pin
Chapter 21
Chapter 22
P
OWER SUPPLY
•
IP 65/67 Degree of protection
•
600 W 5 s
peak
•
AC 100-240 V wide-range input
•
3 switchable outputs
•
Outputs for actors and sensors share one channel
•
95.7 % full load and excellent partial load efficiencies
•
DIN rail mounting possible, option "D"
•
Output connected to PE (PELV)
•
Version without connection to PE on request
•
Large output capacitors
•
Not potted
•
Negligible low input inrush current surge
•
Full power between -25 °C and +55 °C
•
IO-Link
•
3 years warranty
S
HORT-FORM DATA
Output voltage DC 24 V
Adjustment range 24-28 V
Output power Continuous:
360 / 300 / 150 W +45 / +55 / +70 °C
Short term up to 5 s
600 / 300 W
Derate linearly +55 °C to +70 °C
Number of output 3
Output currents Settable per output; up to 10 A
Input voltage AC AC 100-240 V
Input voltage DC DC 110-300
Power factor 0.99 / 0.97
AC Inrush current 2.6 / 6 A
Efficiency 94.3 / 95.7 %
Losses 18.1 / 13.5 W
Hold-up time 44 / 44 ms
Temperature range -25 °C to +70 °C
Size (wxhxd) 181x183x59 mm Without connectors
Weight 1200 g / 2.7 lb
*) For DC supply voltages above 150 Vdc an external fuse is
required.
M
AJOR APPROVALS AND CONFORMITY
For details or a complete approval list, see chapter 21.
IEC 62368-1
IEC 61010-2-201
www.pulspower.com
FPS300.245-049-112
100-240Vac 24V 300W
Nominal
Factory setting 24.5 V
Up to:
+55 / +70 °C
-15 / +10 %
V*) ±20 %
At 120 / 230 Vac
At 120 / 230 Vac
peak
At 120 / 230 Vac
At 120 / 230 Vac
At 120 / 230 Vac
1 / 40