Voice Dialling - Sony Ericsson Walkman W800 User Manual

Calling
Before voice dialling
You must first activate the voice
dialling function and record your voice
commands. An icon appears next to a
phone number that has a voice
command.
To activate voice dialling and record
names
} Settings }
1
} Voice control } Voice dialling
} Activate } Yes } New voice
select a contact.
2 If the contact has more than one
number, use
numbers. Select the phone
number to which you want to add
the voice command. Now you are
going to record a voice command
such as "John mobile" for the
phone number you selected.
3 Instructions appear. Wait for the
tone and say the command that
you want to record. The voice
command is played back to you.
4 If the recording sounds ok
} No
If not,
5 To record another voice command
for a contact
again and repeat steps 2-4 above.
32
This is the Internet version of the user's guide. © Print only for private use.
the General tab
and to view the
}
Yes.
and repeat step 3.
} New voice } Add
Caller name
You can choose whether you want to
hear the recorded contact name when
you receive a call from that contact.
To turn the caller name on or off
} Settings }
} Voice control } Play caller

Voice dialling

You can voice dial by saying a
and pre-recorded voice command.
Start voice dialling from standby
using the phone, a portable handsfree,
a Bluetooth™ headset or by saying
your magic word.
To make a call from the phone
1 From standby, press and hold one
of the volume buttons.
2 Wait for the tone and say the name
you recorded earlier, for example
"John mobile". The name is
played back to you and the call is
connected.
To make a call with a handsfree
From standby, press the handsfree
button, or the Bluetooth headset
button.
the General tab
name.