Accessories - Graco Quiet Bulldog 215-255 Instructions-Parts List Manual

Grounding Wire and Clamp 222–011
7.6 m (25 ft) long,
1.5 mm (12 gauge)
Bleed-Type Master Air Valve 112–730
17.5 bar (250 psi) Maximum Working Pressure
Relieves air trapped in the air line between the pump
air inlet and this valve when closed.
1 in. npt(f) inlet and outlet.
Air Line Filter 106–150
17.5 bar (250 psi) Maximum Working Pressure
Filters harmful dirt and moisture from the compressed
air supply. 3/4 npt(f) inlet and outlet.
See instruction manual 308–169.
Air Line Lubricator 214–849
17.5 bar (250 psi) Maximum Working Pressure
Provides automatic lubrication for the air motor.
0.48 liter (16 oz) bowl capacity.
3/4 npt(f) inlet and outlet.
See instruction manual 308–169.
Pump Runaway Valve 224–040
8.4 bar (120 psi) Maximum Working Pressure
Shuts off air supply to the pump if the pump
accelerates beyond the pre-adjusted setting
due to an empty supply container,
interrupted fluid supply to the pump,
or excessive cavitation.
3/4 npt(f) inlet and outlet.
Includes optional 90 ,
3/4 npsm swivel outlet fitting.
See instruction manual 308–201.

Accessories

USE GENUINE GRACO PARTS AND ACCESSORIES
Air Pressure Regulator Kit 207–651
21 bar (300 psi) Maximum Working Pressure
0–9 bar (0–125 psi) Regulated Pressure Range
Includes air regulator 207–755 (see above),
bleed-type master air valve, hose and swivel inlet.
See instruction manual 308–168.
Air Regulator 207–755
21 bar (300 psi) Maximum Working Pressure
1–9 bar (10–125 psi) Regulated Pressure Range
3/4 npt(f) inlet and outlet ports; 1/4 npt(f) pressure
gauge port. See instruction manual 308–168.
Grounded 19 mm (3/4 in.) Buna-N Air Hose
12 bar (175 psi) Maximum Working Pressure
Part No. ID
208–610 19 mm (3/4")
205–548 19 mm (3/4")
208–611 19 mm (3/4")
208–612 19 mm (3/4")
Pipe Plug 100–737
Use to plug the two exhaust holes in the air manifold
so an auxiliary air hose can be used to route exhaust
air out the top of the motor. 1/2 npt(f).
Padded Trip Rod Pliers 207–579
Used to hold the trip rod without damaging the trip
rod's plated surface.
0764
Length Thread Size
1.8 m (6 ft) 3/4 npt(m)
4.5 m (15 ft) 3/4 npt(m)
7.6 m (25 ft) 3/4 npt(m)
15.2 m (50 ft) 3/4 npt(m)