Advertisement
Quick Links
NP12-EER1 & NP12-EER3 Series
For models: NP12A1-EER1, NP12VA1-EER1, NPVFA1-EER1,
NP12A1-EER3, NP12VA1-EER3 and NP12VFA1-EER3
Installation Guide
Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 sales@altelix.com www.altelix.com
Copyright (C) 2023 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC.
Specifications are subject to change without notice. See www.altelix.com for most current information
IS0204 Rev B 07/25/23
eero™ is a trademark or registered trademark of EERO, LLC
Advertisement
Related Manuals for Altelix NP12-EER3 Series
Summary of Contents for Altelix NP12-EER3 Series
- Page 1 Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 sales@altelix.com www.altelix.com Copyright (C) 2023 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC. Specifications are subject to change without notice. See www.altelix.com for most current information IS0204 Rev B 07/25/23 eero™...
- Page 2 Installation Guide Page-1 Installing the eero The NP12-EER1 and NP12-EER3 feature a cradle type mount specifically designed to secure the eero Router, eero 6 and eero 6 Extender inside the enclosure. 1. Slide the eero device into the mounting cradle as shown. eero Mounting Cradle Note: Photos may look different from actual enclosure model.
- Page 3 Installation Guide Page-2 Connecting the eero A cable gland is provided on the enclosure to allow the Ethernet cable (not included) to be connected to the eero device. Cable Gland Pre-Wired Enclosure Cable Grommet (2) Used for Ethernet Power Cord Used for additional wiring Cable Step 1...
- Page 4 Installation Guide Page-3 5. Once the Ethernet cable is connected to the eero device, secure cable using the cable clamp provided on the enclosure. To prevent damaging the cable, do not over-tighten clamp. Cable Clamp Note: Photo may look different from actual enclosure model. 6.
-
Page 5: Wall Mounting The Enclosure
The enclosure can be secured to the wall using the mounting screws included in the kit. Install wall anchors as required. Mounting Tabs (3-Total) Mounting Screws sales@altelix.com Got Questions? We are here to help. USA & Canada: 866-660-9434 Contact us at:... - Page 6 Installation Guide Page-5 Using Internal Mounting Feet 1. Using a ¼” drill bit, drill (4) holes through the center of the mounting feet in the locations shown. Inside of Enclosure (Equipment plate not shown for clarity) Mounting Feet Drill Locations Mounting the Enclosure 2.
-
Page 7: Mounting Hole Locations
Installation Guide Page-6 Mounting Hole Locations IS0204 Rev B 07/25/23... - Page 8 Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 sales@altelix.com www.altelix.com Copyright (C) 2023 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC. Specifications are subject to change without notice. See www.altelix.com for most current information...
Need help?
Do you have a question about the NP12-EER3 Series and is the answer not in the manual?
Questions and answers