Advertisement
Operation
Power
Press the power button(
Taking measurements
1. Hold the probe in the area to be tested.
2. Allow adequate time for readings to
stabilize.
3. The Relative Humidity measurement
appears in the top display.
4. Pressing the °F/°C/WBT/Dew Point button
toggles the lower display between
Temperature (°F), Temperature (°C), Dew
Point (°C), Dew Point (°F), Wet Bulb (°C)
and Wet Bulb (°F).
Dew Point measurements
1. To select the Dew Point
measurement, press the
°F/°C/WBT/Dew Point button until
DEWPOINT (°F or °C) appears in the
lower right.
2. Dew Point temperature is now
displayed.
) to turn power on or off.
3
°C °F
°C °F
Dewpoint
RH390-EU-EN V2.3 07/13
Advertisement
