Connect The Grounding Cable - Juniper AP63 Deployment Manual

• Mounting bracket 2
• Mounting bracket 3
• Four M6x10mm screws
• Four bolts and nuts

Connect the Grounding Cable

We recommend that you ground the AP before mounting it on a wall or pole. The AP63 has a single-
hole protective grounding terminal on the rear. Use this grounding terminal to ground the AP.
To ground the AP61:
1. Remove the screw.
2. Place the grounding lug attached to the grounding cable over the grounding terminal.
3. Secure the grounding cable lug to the grounding terminal with the screw.
18