Connect The Grounding Cable - Juniper AP61 Deployment Manual

19
• One W-Bar
• Two M8x80 screw bolts
• One M8x90 screw bolt and nut
• Four M6x16 screws
• Four M6x10 screws
• Four wood screws
• Four wood or gyprock plugs
• Eight washers
• Eight spring washers
• One metal plate assembly with RT2 mount

Connect the Grounding Cable

We recommend that you ground the AP before mounting it on a wall or pole. The AP61 has a single-
hole protective grounding terminal on the rear. Use this grounding terminal to ground the AP.
To ground the AP61: