Do you have a question about the revive and is the answer not in the manual?
Questions and answers
Sybille Swantek
February 23, 2025
The head portion returns flat when in use
1 comments:
Mr. Anderson
February 23, 2025
The head section of the Living Spaces Revive adjustable base may return to the flat position if it is too close to the wall. Additionally, an obstruction in the bed mechanism could cause this issue. Checking for obstructions and ensuring proper clearance from the wall can help resolve this problem.
Page 1
REV1.0 Wired Adjustable Base OWNER’S MANUAL Installation & Operation by LIVING SPACES Patent Pending Warranty - 2-Year Parts and Labor on entire base...
Safety & Warranty Warnings Attention: READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT WARRANTY WARNING! Do not open or tamper with control box, motors, or remote (with the exception of battery compartments). The warranty will be void if the internal If unable to understand warnings, cautions, and/or instructions, contact the dealer or technical personnel if applicable, before attempting to workings of these components are tampered with.
Parts List All electronics and components that need to be installed are located in boxes under the foundation or RADIO FREQUENCY:2.4 GHz attached to the frame. Before discarding the packing materials, ensure that all the parts are accounted for. FCC COMPLIANCE: WIRED REMOTE RETAINER BAR POWER CORD...
Installation Guide 2. To install all six legs (seven for king/CK size,see image A 5. Carefully flip the foundation over onto its legs. Head Middle Leg on King/CK Size Only on page 12) , thread the bolt of the leg to the nut on the foundation frame, and tighten by hand.
REV1.0 Remote Control Instructions Synchronizing Two Bases FOR TXL OR CKS BASES ONLY OVERVIEW Two TXL or CKS bases may be placed next to each other to form a King or Cal King. Both sides can be operated independently with their own HEAD CONTROL remotes or, if desired, a single remote can be used with both bases.
Headboard Bracket Installation Guide Troubleshooting In the event that the power foundation fails to operate, assess the symptoms and possible solutions Headboard brackets are an optional accessory and are not included. provided in the chart below. A 1/2'' (13 mm) socket and 1/2'' (13 mm) crescent wrench are necessary to complete installation. HEADBOARD BRACKET COMPONENTS PROBLEM POSSIBLE SOLUTION...
Need help?
Do you have a question about the revive and is the answer not in the manual?
Questions and answers
The head portion returns flat when in use
The head section of the Living Spaces Revive adjustable base may return to the flat position if it is too close to the wall. Additionally, an obstruction in the bed mechanism could cause this issue. Checking for obstructions and ensuring proper clearance from the wall can help resolve this problem.
This answer is automatically generated