Table of Contents
Advertisement
Question
How do I switch the
ion level?
Why does the
appliance beep twice
during
MOISTURIZING mode
or PURIFYING mode?
Why should the adaptor
be disconnected after
charge?
What is the
constituent of the
dedicated oil?
56
Answer
With the appliance OFF,
pressing
for more than
2 seconds switches the ion
level between LOW/HIGH.
The ion level is stored, each
mode will operate at the
same level, and the appliance
starts with the same level
next time. (See page 42.)
The appliance beeps twice if
the ion plate and ion panel are
not making contact with skin.
If there is no contact for
continuous 30 seconds, the
appliance beeps three times
and the power turns off
automatically. (See page 42.)
Charging the battery for more
than 1 hour will not affect
battery performance, but
disconnect the adaptor for
safety and to save energy.
Constituent of the oil is
liquid paraffin.
Question
Why does the
appliance beep twice
after switched off?
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the
store where you purchased the unit or a service
center authorized by Panasonic for repair.
Answer
The sound indicates that the
battery capacity is running
low. Please charge the
appliance.
Advertisement
Chapters
Table of Contents
