Table of Contents
Advertisement
Operation and display of the switch lock
►Locking the power switch
1. Press
once
2. Hold
and then release.
than 2 seconds
• The shaver
until the switch
starts
lock lamp ( )
operating.
turns on.
• The shaver will
stop operating.
►Unlocking the power switch
1. Hold
for more than
2 seconds until the
switch lock lamp ( )
turns off.
• The power switch is locked when the switch lock lamp
( ) blinks for 5 seconds and the shaver does not
operate even though the power switch is pressed.
52
for more
3. Release
• The switch
lock lamp
( ) will
light up for
5 seconds
and turn off.
2. Once the shaver starts
operating, release
.
• The switch lock lamp
( ) will turn off.
• While the shaver is locked, the shaver cannot be
operated and the lamps do not glow even if
pressed.
Cleaning the shaver
.
We recommend cleaning the shaver after each use.
Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1
Apply some hand soap and some
water to the system outer foil and
ion plate�
2
Hold
for more than
2 seconds to activate the sonic
vibration cleaning mode�
• The switch lock lamp ( ) and
charge status lamp ( ) blink
alternately.
• After about 18 seconds, it will be
automatically turned off, or you can turn it off by
pressing the power switch.
3
With the shaver stopped, remove the outer foil
section and hold
• See page 54 for removing the outer foil section.
is
for more than 2 seconds�
Advertisement
Chapters
Table of Contents
