Sony ICF-J1 Service Manual page 4

"ANTENNA, TELESCOPIC (FM/SW) (ANT1)", "CABINET (REAR)"
2 claw
CHASSIS SECTION
Note: When mounting the battery terminals (+) and (–), engage the lead wires
to the hook on the cabinet (front) and route them as shown.
terminal (–),
battery
hook
cabinet (front)
6 antenna, telescopic
(FM/SW) (ANT1)
5 lug, 3
4 screw
(P2.6 × 8)
terminal (+),
battery
2 terminal (+),
battery
3 terminal (–),
2 claw
3
1 Remove two solders
of speaker lead wires.
battery
4 chassis section
– 4 –
Note: Arrange the antenna,
wire to the 4 slots.
antenna, wire
1 five screws
(BTP3 × 12)
7 cabinet (rear)
• LEAD WIRE COLOR INDICATION
ON MAIN BOARD.
MAIN Board
speaker lead wire (RED)
speaker lead wire
(WHT)
SP 3
SP #
GND
+ B
battery terminal (–)
lead wire (WHT)
battery terminal (+)
lead wire (WHT/RED)