Advertisement
Quick Links
Advertisement
Related Manuals for Brew Monk B40
Summary of Contents for Brew Monk B40
- Page 1 craft beer made easy! USER MANUAL NL - FR - EN - DE - IT - ES - PT - PL - NO - DK - SE...
- Page 2 Any failure caused by ignoring the instructions and precautions mentioned in this user manual are not covered by our warranty and we cannot assume any liability. TIP: Scan the QR code on the back of your Brew Monk to always keep the manual close to hand.
-
Page 3: Safety Instructions
• The appliance must be positioned on a stable, secure and horizontal support structure prior to use. • A full vessel contains boiling hot liquids and can weigh up to 40 kg (B40), 50 kg (B50) and 70 kg (B70). - Page 4 2.2 Assembling the bazooka filter Attach the bazooka filter (12) on the male thread inside the Brew Monk using the coupling piece and tighten using a screwdriver (see the image below). 2.3 Assembling the overflow pipe...
- Page 5 EN – Brew Monk User Manual 2.3.1 Assembling the malt pipe outside the Brew Monk Step 1 Place the male thread connector (E) through the bottom malt screen (B) and affix with one nut (D). Step 2 You can adjust the overflow pipe according to the amount of malt recommended for your recipe.
- Page 6 Step 2 Extend the overflow pipe (6) to its maximum length. Step 3 Insert the malt pipe (9) into the Brew Monk (1). Fill it with water according to the recipe. Step 4 Put the transparent cap on (13) and add malt to the malt pipe (9).
- Page 7 3.3 How do I connect my Brew Monk B40/B50/B70 to the Wi-Fi? 1. When you use your Brew Monk for the first time, it will ask whether you want to connect it to the internet straight away. If you ignore this message, you can still connect the appliance at a later date.
- Page 8 EN – Brew Monk User Manual 4. You have the option to ‘Sync to kettle’ with each recipe. If this is enabled, the software will send the recipe to your kettle. 5. You can brew a recipe in two ways: 1.
-
Page 9: Maintenance
EN – Brew Monk User Manual 4. Maintenance • It is very important to clean the machine after every use. The dry ingredients may stick to the metal and inside the pump. • Rinse the machine with 5 to 10 litres of 60°C water for 15 minutes or more until it is clean. Turn on the pump during cleaning.