Instructions-Parts List
®
GL-1
For Single–Line Parallel Automatic Lubrication Systems.
Important Safety Instructions
Read all warnings and instructions in this manual and related automatic
lubrication system instruction manuals. Save all instructions.
SKIN INJECTION HAZARD
Fluid from the injector, leaks, or ruptured components
can inject fluid into your body and cause extremely seri-
ous injury, including the need for amputation. Fluid
injected into the skin might look like just a cut, but it is a
serious injury. Get immediate surgical treatment.
Fluid splashed in the eyes or on the skin can also
cause serious injury. The equipment may be pressur-
ized already, or it could become pressurized by an
automatic lube cycle initiated by Lubrication Controller
(timer). Disconnect power to the timer, and disconnect
the air supply to the pump module to ensure that the
system is depressurized. See the pressure relief pro-
cedure in the pump manual incuded with your auto-
matic lubrication system.
GL-1 Injector Models
Part No.
Description
114901
Injector, GL–1, one point
114902
Injector, GL–1, two point
Injector, GL–1, three point
114903
Injector, GL–1, four point
114904
Injector, GL–1, five point
114905
Injector, GL-1, six point
117206
Injector, GL–1, replacement
114909
Injector, SST, replacement
25N109
Injectors
Dimension A
1.25 in. (31.7 mm)
2.50 in. (63.4 mm)
3.75 in. (95.1 mm)
4.99 in. (126.8 mm)
1-1/4"
7-1/16"
A
1.5"
B
Bare Manifold
Dimension B
2.48 in. (63.0 mm)
3.00 in. (76.0 mm)
4.23 in. (107.5 mm)
5.47 in. (139.0 mm)
6.71 in. (170.5 mm)
7.90 in. (202.7 mm)
308953V
1/8" npt
dispense
outlet
13/32"
mounting
holes
3/8" npt
Model 114903 Shown
Part No.
114911
114912
114913
114914
114915
118206
EN
1.25"