Control The Camera With Visca - Axis V5938 User Manual

AXIS V5938 PTZ Network Camera
Configure your device
1. Go to PTZ > Limits.
2. Set the limits as needed.
Create a guard tour with preset positions
A guard tour displays the video stream from different preset positions either in a predetermined or random order, and for configurable
periods of time.
1. Go to PTZ > Guard tours.
2. Click
3. Select Preset position and click Create.
4. Under General settings:
- Enter a name for the guard tour and specify the pause length between each tour.
- If you want the guard tour to go to the preset positions in a random order, turn on Play guard tour in random
order.
5. Under Step settings:
- Set the duration for the preset.
- Set the move speed, which controls how fast to move to the next preset.
6. Go to Preset positions.
6.1 Select the preset positions that you want in your guard tour.
6.2 Drag them to the View order area, and click Done.
7. To schedule the guard tour, go to System > Events.
Create a recorded guard tour
1. Go to PTZ > Guard tours.
2. Click
3. Select Recorded and click Create.
4. Enter a name for the guard tour and specify the pause length between each tour.
5. Click Start recording tour to start recording the pan/tilt/zoom movements.
6. When you're satisfied, click Stop recording tour.
7. Click Done.
8. To schedule the guard tour, go to System > Events.

Control the camera with VISCA

There are two ways to control this camera with VISCA:
VISCA over IP - Select this to communicate over the Ethernet.
VISCA over serial - Select this to communicate over serial connection.
Guard tour.
Guard tour.
12