Advertisement
TWO SPEED
BIT STORAGE AREA
GEARTRAIN(HI-LO)
AUXILIARY
HANDLE
KEYLESS
CHUCK
TORQUE
SWITCH
ADJUSTMENT
TRIGGER
RING
SCREWDRIVER BITS_
DIRECTIONOF
ROTATION SELECTOR
(FORWARD/REVERSE)
LOCK-ON
BuIrON
Fig. 1
,_
WARNING:
If any parts are missing, do not operate
your drill-driver until the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
AUXILIARY
HANDLE
See Figure 2.
An auxiliary handle is packed with your drill-driver for ease of
operation and to help prevent loss of control. The handle can
be rotated 360 °.
Note: For convenience
and ease of starting threads, the
hex nut has been trapped inside the molded slot in the
auxiliary handle.
TO INSTALL:
•
Unplug your drill-driver.
_1
WARNING:
Failure to unplug your drill-driver could
result in accidental starting causing serious injury.
•
Place ring of handle over the chuck and torque
adjustment ring. Note: Notches in handle fits in a
groove behind torque adjustment ring.
•
Once in position behind torque adjustment ring, rotate
handle to desired angle.
•
Thread wing screw into handle insert.
•
Tighten wing screw securely.
WINGSCREW
TO LOOSEN
AUXlLIAR_
OI_TIGHTEN
HANDLE
GROOVE
TORQUE
ADJUSTMENT
RING
NOTCHES
360°
ROTATION
RAISEDRIB
Fig. 2
7
Advertisement
