Advertisement
SYMBOLS
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
min
Minutes
Time
Alternating Current
Type or a characteristic of current
--_
Direct Current
Type or a characteristic
of current
no
No Load Speed
Rotational speed, at no load
.../min
Revolutions or Reciprocation
Per Minute
Revolutions,
strokes,
surface speed, orbits etc. per minute
_1=
Safety Alert Symbol
Indicates danger, warning or caution.
It means attention!!! Your safety is
involved.
DEFINITIONS
A)
B)
C)
D)
DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others.
Always follow the safety precautions
to reduce the risk of fire, electric shock and personal injury.
WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others.
Always follow the safety precautions
to reduce the risk of fire, electric shock and personal injury.
CAUTION:
Failure to obey a safety warning may result in property damage or personal injury
to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric
shock and personal injury.
NOTE: Advises you of information or instructions vital to the operation or maintenance of the
equipment.
,_
WARNING:
The operation of any drill can result in foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety
glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears Retail
Stores.
Advertisement
