Table of Contents
Advertisement
Installation, use and maintenance B300
5. INSTALLATION
5.1 INSTALLATION OF THE MACHINE
If a support column (optional) is not used, install the
machine on a surface which is level, dry and suitable
for the weight of the machine plus the food to be
sliced; refer to paragraph 3.1
Check that there is nothing that can get in the way of
the flywheel, carriage movement and food loading.
5.2 COMMAND DESCRIPTION
5.2.1 MANOEUVRING FLYWHEEL
The flywheel (1) turned clockwise allows the
carriage to be moved with the food plate with
simultaneous blade rotation.
5.2.2 REGULATING KNOB FOR SLICE THICKNESS
The thickness of the slice is regulated by turning
the graduated scale knob (2) clockwise.
Regulating field: see paragraph 3.1.
5.2.3 OVERPLATE ADVANCE HANDWHEEL
The handwheel (3) allows the overplate with the
product to be brought quickly near to the blade
after loading it or taken away from the blade
after cutting or for small regulations.
5.2.4 OVERPLATE RAPID ADVANCE LEVER
Pull the lever (4), in order to near quickly the
overplate to the blade or to remove it at the end
of the cutting operation.
The operation is considerable more rapid than
the one executable with the little flywheel.
9
Advertisement
Table of Contents
