Kohler K-29918T-NSHC Installation Instructions Manual page 15

2. As is shown, fix the EPE block onto the drain hole and inlet
hole.
2. EPE
3. As shown, remove the EPE after finishing the wall. Screw
in the long screw as desired. Eliminate unwanted mask
with a sharp knife, if there is mask. Sort the hose on the
valve.
3. EPE
D. Installation of Toilet
D.
1. Install the inlet pipe to the lavatory as shown, and mark on
the pipes at the back side of the tank with a ruler and a
pencil, and reserve appropriate space according to the
distance from the back of the tank to the inlet hole on the
wall.
1.
2. Eliminate unwanted part of the inlet pipe according to the
marks of reserved space ,and rasp a smooth surface with
files.
2.
1381424-T01-B
Water Inlet
Drainage Hole
Inlet Pipe
Drainage Pipe
Reserved Space
Drainage Pipe
-9-
EPE Block
EPE
Water Tank Bracket
Mask
Long Screw
EPE Block
EPE
Inlet Pipe