Kohler ESCALE K-32771T-NS Installation Instructions Manual
Kohler ESCALE K-32771T-NS Installation Instructions Manual

Kohler ESCALE K-32771T-NS Installation Instructions Manual

Table of Contents

Advertisement

Quick Links

BEFORE YOU BEGIN
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information-please leave instructions for the
consumer.
ORDERING INFORMATION
ESCALE WH W/O ST
(HT110 P,3.5/6.0) ..............................................K-32771T-NS
Includes Bowl ..................................................K-19045T-2
Includes HT110 IWT W/F
3.5/6.0L(ESCALE WH) ............K-32784T-EA-NA
ESCALE WH Toilet (HT100 TL IWT)....................K-24837T-S
Includes Bowl ..................................................K-19045T-2
Includes HYDRO-TOWER 100
Touchless In-Wall Tank .................K-6281T-ESS
Includes ESCALE Quiet-close Toilet Seat............K-4417T
ESCALE WH Toilet (HT300 MEC IWT)................K-24838T-S
Includes Bowl ..................................................K-19045T-2
Includes HYDRO-TOWER 300
In-Wall Tank .................................K-4178T-ESS
Includes ESCALE Quiet-close Toilet Seat............K-4417T
ESCALE WH Toilet (HT100 MEC IWT)................K-24839T-S
Includes Bowl ..................................................K-19045T-2
Includes HYDRO-TOWER 100
In-Wall Tank .................................K-6284T-ESS
Includes ESCALE Quiet-close Toilet Seat............K-4417T
ESCALE WH Toilet (BEAM M FV).....................K-24913T-GS
Includes Bowl ...............................................K-21565T-GS
Includes BEAM Manual Toilet/Squat
Flush Valve ......................................K-77682K-G
Includes ESCALE Quiet-close Toilet Seat............K-4417T
No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137
8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA
NO.1 KOHLER STREET, ECONOMIC DEVELOPMENT ZONE OF FAKU COUNTY, SHENYANG LIAONING PROVINCE, PRC
1054932-T01-H
VITREOUS CHINA WALL-HUNG P-TRAP TOILET
K-32771T-NS/K-24837T-S/K-24838T-S/K-24839T-S/K-24913T-GS
K-23136T-CPS/K-23136T-BNS/K-23137T-CPS/K-23137T-BNS
·
·
·
(
110
.............................................................K-19045T-2
110
3.5/6.0 (
.............................................................K-19045T-2
100
.............................................................K-19045T-2
300
.............................................................K-19045T-2
100
..........................................................K-21565T-GS
........................................................K-77682K-G
2
8
256410
1
110400
©
Copyright Kohler China Investment Co., Ltd. 2021
-1-
©
ESCALE
INSTALLATION INSTRUCTIONS
,3.5/6.0 )...........................K-32771T-NS
,
) .....................K-32784T-EA-NA
(
100
..........................K-6281T-ESS
..................................K-4417T
(
300
) .........K-24838T-S
........................................K-4178T-ESS
..................................K-4417T
(
100
) .........K-24839T-S
........................................K-6284T-ESS
..................................K-4417T
(
) ............K-24913T-GS
..................................K-4417T
528137
POST CODE:
256410
POST CODE:
-
)..K-24837T-S
:
110400
2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ESCALE K-32771T-NS and is the answer not in the manual?

Questions and answers

Summary of Contents for Kohler ESCALE K-32771T-NS

  • Page 1 Flush Valve ........K-77682K-G Includes ESCALE Quiet-close Toilet Seat....K-4417T ........K-4417T No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137 528137 8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA POST CODE:...
  • Page 2 ESCALE WH Toilet (BEAM SR D/CP) ....K-23136T-CPS )..K-23136T-CPS Includes Bowl..........K-23138T-DPS ............K-23138T-DPS Includes BEAM Toilet Sensor (DC) ....K-30947T-CP ........K-30947T-CP Includes ESCALE Quiet-close Toilet Seat....K-4417T ........K-4417T ESCALE WH Toilet ).........K-23136T-BNS (BEAM SR D/BN) ..........K-23136T-BNS ............K-23138T-DNS Includes Bowl..........K-23138T-DNS ........K-30947T-BN Includes BEAM Toilet Sensor (DC) ....K-30947T-BN Includes ESCALE Quiet-close Toilet Seat....K-4417T ........K-4417T ESCALE WH Toilet (BEAM SR A/CP).....K-23137T-CPS...
  • Page 3 P-trap 315 350 284 375 366 230 Fig.#1 Kohler reserves the right to change marked dimensions without prior notice. INSTALLATION 1. Install Flushing Mechanism 1-1. Install The Tank 1-1. 1) Turn the water supply off before installing the new toilet.
  • Page 4 Set The Spacing Of The Bowl After you install the tank, be careful to set the spacing of set aside the length for carrier studs and tighten nut. The bowl on wall according to the dimensions as shown. See Fig. #3. Unit: mm Carrier Stud Fig.#3...
  • Page 5 4. Install The New Toilet 1) Install the accessory kit into the installing hole. 2) Place the new toilet on the wall through the carrier. 3) Use wrench to tighten accessories and level the toilet. Then finish fixation. 4) Insert the cap into installing hole. See Fig. #5. Fig.#5 5.
  • Page 6 CONSUMER RESPONSIBILITIES When cleaning up after installation, do not use abrasive cleansers, as they may scratch and dull the toilet surface. Use warm water and a liquid detergent to clean the surface. Remove stubborn stains, paint, or tar with turpentine or paint thinner.
  • Page 7 海德丽 110 入墙式隐藏水箱 In-Wall Tank With Frame In-Wall Tank Without Frame In-Wall Tank Squat 入墙式隐藏水箱(含固定支架)座便器 入墙式隐藏水箱(不含固定支架)座便器 入墙式隐藏式水箱蹲便器 KOHLER CHINA INVESTMENT CO., LTD NO.158, JIANG CHANG SAN ROAD, JING'AN DISTRICT, SHANGHAI, PRC POST CODE: 200436 科勒(中国)投资有限公司 上海市静安区江场三路 158 号 邮编:200436 1456149-K2-A...
  • Page 8: Table Of Contents

    3F. After installation, the water supply and electricity can be connected and used ..............34 REMOVAL AND MAINTENANCE ����������������������������������������������������������������������������������������������������������� 34 A. Removal ....................................34 B. Maintenance ..................................37 TROUBLE SHOOTING PROCEDURES �������������������������������������������������������������������������������������������������� 38 © Copyright Kohler China Investment Co., Ltd. 2022 © 版权为科勒(中国)投资有限公司所有 2022 1456149-K2-A...
  • Page 9 目录 谢谢您选择科勒公司 ........................... 3 安装之前 ..............................3 规格 ................................6 所需工具及材料 ............................6 尺寸图 ................................. 7 安装 ................................8 安装方式 ..............................8 安装方式一:入墙式隐藏水箱(含固定支架)座便器安装 ................9 1A. 隐藏水箱安装 ..................................9 1B. 排污管安装方法 ................................. 11 1C. 供水管连接 ..................................12 1D. 预留检修口安装 ................................. 12 1E.
  • Page 10: Thank-You For Choosing Kohler Company

    • Do not apply components that are not provided by Kohler, and please note that glass adhesive tape shall not be applied to the installation of Kohler spares. Kohler will not be responsible for any damage related to installation with spares not provided by Kohler.
  • Page 11 Product Information HT110 IWT W/F 3.0/4.5L ..............................K-32789T-* HT110 IWT W/F 3.5/5.0L ..............................K-32783T-* HT110 IWT W/F 3.0/6.0L ..............................K-32784T-* HT110 IWT W/F 3.5/6.0L (ESCALE WH) ........................K-32784T-EA HT110 IWT W/F 3.0/4.5L (H) .............................K-32789H-PNE HT110 IWT W/F 3.0/4.5L (K) .............................K-32789K-PNE HT110 IWT W/F 3.0/4.5L (A) .............................K-32789A-PNE HT110 IWT W/F 3.0/5.0L (MY) ..........................
  • Page 12 功能说明 Function explanation • 防倒流功能 • Anti-backflow • 进水水位可调节功能 • Adjustment of inlet water level • 排水水量可调节功能 • Adjustment of flushing volume • 双档冲水功能 • Single/double gear flushing • 无需工具用手即可实现拆装维修。 • Assemble, disassemble and maintenance can be done without tools. Design and installation concept of In-Wall Tank •...
  • Page 13: Specifications

    规格 SPECIFICATIONS Full flushing volume: 6.0L Half flushing volume: 6.0L 大档水量:6.0L K-32787T 小档水量:6.0L Full flushing volume: 6.0L Half flushing volume: 3.5L 大档水量:6.0L K-32784T-EA 小档水量:3.5L K-32784T-* Full flushing volume: 6.0L K-32785T-* Half flushing volume: 3.0L 大档水量:6.0L K-32784TW-PNE 小档水量:3.0L K-32785TW-PNE Full flushing volume: 5.0L K-32783T-* Half flushing volume: 3.5L 大档水量:5.0L...
  • Page 14: Roughing-In

    尺寸图 ROUGHING-IN Reference Value UNIT: mm 参考值 单位:毫米 K-32783T-*/K-32784T-*/K-32789T-*/K-32789H-PNE/K-32784TW-PNE K-32789K-PNE/K-32789A-PNE/K-32615MY-PNE/K-32791R-PNE Installation with faceplate K-20341T-PNE 与气动面板 安装 520 3 K-20341T-PNE 80~120 440 3 Method one: Method two: Method three: Press from front Remote pinch installation Remote installation of mask 安装方式二: 安装方式三: 安装方式一:...
  • Page 15: Installation

    K-75890T/K-75890T-PNE K-75891T/K-75891T-PNE K-77271T 225 1 225 1 225 1 225 1 Kohler reserves the right to change marked dimensions without prior notice. 科勒公司保留随时变更图中标示尺寸的权利, 无需另行通知。 安装 INSTALLATION INSTALLATION METHODS 安装方式 There are three methods to install this product: In-Wall Tank with frame, In-Wall Tank without frame & In-Wall Tank squat.
  • Page 16: First Method: Installation For In-Wall Tank With Frame

    First method: Installation for In-Wall Tank with frame 安装方式一:入墙式隐藏水箱(含固定支架)座便器安装 Inlet Hole Drainage Hole 1A� Installation of In-Wall Tank 进水口 排污口 1A. 隐藏水箱安装 One. Installation of In-Wall Tank on the solid wall 一 . 在实心承重墙上隐藏水箱的安装 1. Check the height of h1 inlet hole and h2 drainage hole according to dimensions of bowl, then loose the bolt by hex- Finished Floor 完工地面...
  • Page 17 Two. Installation of In-Wall Tank on the timber 二 . 在木框架上隐藏水箱的安装 1. Minimum cavity (stud pocket) dimensions for installation of the In-Wall Tank, 525mm wide, 80mm deep. 1. 水箱安装的木框架空间最小尺寸:80mm 深,525mm 宽。 最小 Min( )80mm Inlet Hole Drainage Hole 进水口 排污口 2.
  • Page 18: Discharge Pipe Installation Method

    Three. Installation of side overflow pipe (K-32789H-PNE) 三 . 侧边溢流管安装 (K-32789H-PNE) Overflow Pipe 接溢流管 Connect with overflow pipe on the side when installing. 施工时侧边接溢流管。 1B� Discharge pipe installation method 1B. 排污管安装方法 Water Tank One. Floor discharge installation method 一 . 地排安装方法 Bracket 水箱架...
  • Page 19: Connecting The Water Pipe

    Two. Installation of p-trap 二 . 横排安装方法 Water Tank Bracket 水箱架 First of all, there are two discharge pipe installation methods based on actual situations: A, B. 首先根据实际情况有 A、B 两种排污管安装方法。 110mm Discharge Connector 排污转接头 110mm A. Install 110mm discharge connector onto 110mm drain outlet on the wall.
  • Page 20 B. Connect the full-flush dark gray and the half-flush blue air Half Flush Blue Air Hose Of Flush Valve 排水阀小冲蓝色气管 hose of the flush valve to the joint of remote air hose. Full Flush Dark Gray Air B. 远程安装时,连接排水阀的大冲深灰色和小冲蓝色气管到远 Hose Of Flush Valve Joint 排水阀大冲深灰色气管...
  • Page 21 1. Method one: Press from front (Mask is reserved access panel) 1. 安装方式一:前按(方外罩为预留检修口) Mask 方外罩 Cover 遮板 Remove the cover, install the mask in the block screen of the tank, and tighten the screw to fixate the mask to the tank. Note: Do not remove and discard the mask cover before Screw 螺丝...
  • Page 22 Two. Intelligent faceplate reserved access panel installation, method one: press from front only Faceplate No.: 二 . 智能面板预留检修口安装方式,仅有前按安装方式 面板编号: K-23056T K-23056TW K-24147T-7 K-78041-7 Note: K-78041-7 does not provide transformer and air pump assembly. Need to purchase the model K-28236-NA separately. 注:...
  • Page 23: Brickwork Of The Wall

    Three. Mechanical faceplate reserved access panel installation, method one: press from front only Faceplate No.: 三 . 机械面板预留检修口安装方式,仅有前按安装方式 面板编号: K-4177T K-8857T K-20341T K-75890T K-75891T K-77271T Remove the cover, install the mask in the block screen of the tank, and tighten the screw to fixate the mask to the Mask 方外罩...
  • Page 24: Installation Of Wall-Hung Toilet

    3. After completing the brickwork of the wall, remove protection of inlet hole and drainage hole 3. 砌墙后,取出进、排水口防护 Mask 方外罩 When finishing the brickwork of the wall, take out the big and small caps, and eliminate unwanted mask with a sharp Cover knife, if there is mask.
  • Page 25 4. Install the drainage pipe and inlet pipe to the corresponding pipes on the tank. Mark A3, A4 on the drainage pipe and the inlet pipe at the back side of the wall with a ruler and a pencil. 4. 如图将座便器的排污管、进水管装入水箱的对应管道。用直 尺放在安装墙面后面的排污管、进水管用铅笔做标记线...
  • Page 26: Installation Of Faceplate

    8. Install the toilet as shown in the illustration, and use a spirit level to ensure the toilet remains level. 8. 如图将座便器装上,并用水平尺测量座便器是否平衡。 Spirit Level 水平尺 9. Install the reserved lock, washer, hexagonal nut and decoration cap onto the long screw in the order shown in the illustration.
  • Page 27 2. Installing the locking plate 2. 定位板安装 Fixation Pipe 固定管 A. Faceplate press from front or remote installation of mask. Fixing Lock 固定扣 A. 适配前按及远程方外罩安装。 Locking Plate 定位板 a. When tightening the four fixation pipes on the locking plate, adjust to the "OPEN" mark as shown. a.
  • Page 28 4. Fitting the faceplate 4. 面板固定 Faceplate 面板 Put the lock on the faceplate directly on the reversed lock on the locking plate, then push the faceplate and lock it. The Faceplate 面板 installation shall begin from bottom to top. Locking Plate 定位板...
  • Page 29 Locking Plate 定位板 3. Installing the air pump on the Intelligent faceplate 3. 智能面板气泵盒组件安装 A. Install the air pump assembly to faceplate and need attention: the slot of faceplate and the rib of air pump Slot A 卡槽 needs install properly to correspond. (A-A/B-B) Prevent installation improperly.
  • Page 30 Lock 扣位 Three. Mechanical faceplate installation Faceplate No.: 三 . 机械面板安装方式 面板编号: K-4177T K-8857T K-20341T K-75890T K-75891T K-77271T Full Flush Dark Gray Air Hose 大冲深灰色气管 1. Installing the pneumatic cylinder (Packed in mask box) Half Flush Blue Air Hose 1. 气缸组件安装(方外罩包装盒内) 小冲蓝色气管...
  • Page 31: After Installation, The Water Supply And Electricity Can Be Connected And Used

    3. Installing the locking plate 3. 定位板安装 Fixation Pipe 固定管 A. When tighten the four fixation pipes on the locking plate, Fixing Lock 固定扣 adjust to "OPEN" mark as shown. A. 如图将定位板装上时,把四个固定管调整在标识 "OPEN" Locking Plate 字样装上。 定位板 Fixation Pipe 固定管 B.
  • Page 32: Second Method: Installation For In-Wall Tank Without Frame

    Second method: Installation for In-Wall Tank without frame 安装方式二:无框架入墙式隐藏水箱座便器安装 2A� Installation of In-Wall Tank 2A. 隐藏水箱安装 One. Installation of In-Wall Tank on a solid wall Z-Connecting Plate Z 连接板 一 . 在实心承重墙上隐藏水箱的安装 Screw With Washer 螺丝及垫片组合件 1. Install Z-connecting plate onto tank 1.
  • Page 33 Spirit Level Note: 1. Following the steps: 2B. Discharge pipe installation 水平尺 method before fixating the tank. 2. Ensure that the tank remains level and plumb. Tank 水箱 3. Keep the outlet pipe of the water tank upright. Do not bend it.
  • Page 34: Discharge Pipe Installation Method

    4. As Fig A, B shown, tighten ten M4 coach/tek screws (not Stud 木框架 supplied) to fixate the tank. M4 Coach/Tek Screws 4. 如图 A、B,用 10 颗 M4 方头自攻螺丝(产品未提供)将水 (Not Supplied) Fixing Hole M4 方头自攻螺丝 安装孔 箱固定。 (产品未提供) Outlet Pipe Note: 1.
  • Page 35: Brickwork Of The Wall

    2E� Brickwork of the wall 2E. 砌墙 1. Protection of inlet hole and drainage hole 1. 进、排水口防护 Cover the drainage hole with the big cap, cover the inlet hole with the small cap. 将大防污盖装在排污口上,小防污盖装在进水口上。 Small Cap 小防物盖 Inlet Hole 进水口 Big Cap 大防物盖...
  • Page 36: Installation Of Wall-Faced Toilet

    2F� Installation of wall-faced toilet 2F. 落地座便器安装 1. Install the big and small leak-proof gaskets on the inlet pipe and drainage pipe, and then install them to the corresponding pipes on the toilet. Small Leak-proof Gasket 小防漏胶圈 1. 如图将座便器的排污管、进水管装上大、小防漏胶圈,然后 装在座便器的相对应管道。 Inlet Pipe 进水管...
  • Page 37: Following The Steps: 1G. Installation Of Faceplate

    Inlet Pipe 5. Eliminate unwanted part of the drainage pipe and the inlet 进水管 pipe according to the marks of reserved space L2+3, L1+3, and rasp a smooth surface with files. 5. 如图在排污管、进水管已作标记的后端多余部分 L2+3,L1+3 锯掉。然后再用锉刀将锯掉的面挫平整并倒角。 Note: According to step 4, re-install the cut drainage pipe and inlet pipe into the corresponding pipes of the tank.
  • Page 38: Third Method: Installation For In-Wall Tank Squat

    Third method: Installation for In-Wall Tank squat 安装方式三:入墙式隐藏水箱蹲便器安装 3A� Installation of In-Wall Tank 3A. 隐藏水箱安装 1. Install Z-connecting plate onto tank Z-Connecting Plate 1. Z 连接板安装 Z 连接板 Screw With Washer 螺丝及垫片组合件 Fasten the screw with washer to fixate the Z-connecting plate onto tank.
  • Page 39: Following The Steps: 1C. Connecting The Water Pipe

    Spirit Level B. Align tank on the wall as shown and locate the installation 水平尺 holes of the Z-connecting plate. Mark on the wall for the appropriate position for the Z-connecting plate, and drill four holes with a diameter of 12mm and a depth of 65mm with churn drilling as shown in illustration, and fill in the Tank 水箱...
  • Page 40: Installation Of Squat And Brickwork Of The Wall

    3D� Installation of squat and brickwork of the wall 3D. 蹲便器安装及砌墙 1. Fixate the leak-proof gasket to syphon as shown in illustration, and adjust the syphon to the appropriate position to be fixed to the infall of squat. Note: Eliminate unwanted syphon. 1.
  • Page 41: Following The Steps: 1G. Installation Of Faceplate

    3E� Following the steps: 1G� Installation of Full faceplate 3E. 按照步骤:1G. 面板安装 Flush Button 大排按钮 Half Flush Button 小排按钮 3F� After installation, the water supply and electricity can be connected and used 3F. 安装完毕,可以通水或者通电使用 Note: Reserve access panel at front of the tank in remote installation.
  • Page 42 4. If a cover is installed, remove the cover according to the figure. 4. 如有安装遮板,按图取下遮板。 Cover 遮板 5. As shown if there is pneumatic cylinder, hold the left and right snaps along the arrow direction to dismantle the Full Flush Dark Gray Air Hose 大冲深灰色气管...
  • Page 43 9. Loose nut as shown, then take the water inlet valve out. 9. 如图把螺母旋松,然后取出进水阀。 Tighten Loosen 拧紧 打开 螺母 10. Hold the fastener by hand as shown, pull the top of fastener along the direction of the arrow. Then remove the fastener. 10.
  • Page 44: Maintenance

    Flush Valve 排水阀 Flush Valve 排水阀 B� Maintenance B. 维护 Stop Valve Filtration Net 1. Washing the filtration net 角阀 滤网 Close the stop valve first, then loosen and take out the locknut, and rinse the waste from the filtration net with clean water, then reset the locknut to its original position.
  • Page 45: Trouble Shooting Procedures

    故障排除 TROUBLE SHOOTING PROCEDURES Symptoms Probable Causes Recommended Actions The inlet valve is closed. Open inlet valve. No water fills in via inlet Floating box of inlet valve is blocked by other Readjust the position of other parts to avoid valve parts.

Table of Contents