Kohler K-29918T-NSHC Installation Instructions Manual page 12

2. Connect tap water braided tube on the top of water tank for
water supply as shown.
Note: 1. Ensure water tank internal valve is OFF.
2. Suggestion: connect a temporary rubber or plastic
hose on valve, flush water supply pipeline. Ensure
water is clean, no residual sand stone or fouling
inside pipeline.
2.
1.
2.
3. Install tap water braided tube on angle valve for water
supply as shown.
Note: 1. Ensure valve is OFF.
2. Suggestion: connect a temporary rubber or plastic
hose on valve, flush water supply pipeline to ensure
water is clean, no residual sand stone or fouling
inside the pipeline.
3. The valve and hose are for connecting the Bidet seat,
please do not remove.
3.
1.
2.
3.
4. As shown, pull the pre-arranged power line through the
hole of the iron rack and connect to the socket (inside tank
package). Fix the socket onto the iron rack.
4.
5. As is shown, fix the EPE block onto the drain hole and inlet
hole.
5. EPE
1381424-T01-B
Connecting Pipe
Valve
Hose
Tap water braided tube
Inlet Hole
Drainage Hole
-6-
Water Pipe
Valve
Hose
Tap water braided tube
Cable
Screw M3X0.5
M3X0.5
Socket
Tank Bracket
EPE Block
EPE