Table of Contents
Advertisement
Chapter 5: VIA VT8237 SATA RAID Setup Guide
On the upper-right side of the screen is the message and legend box. The keys on
the legend box allow you to navigate through the setup menu options. The
message describes the function of each menu item. The following lists the keys
found in the legend box with their corresponding functions.
F1
Enter
ESC
Create Array
1
In the VIA RAID BIOS utility main menu, select Create Array then
press the <Enter> key. The main menu items on the upper-left corner of
the screen are replaced with create array menu options.
RAID 0 for performance
1
Select the second option item Array Mode, then press the <Enter> key.
The RAID system setting pop-up menu appears.
2
Select RAID 0 for performance from the menu and press <Enter>.
From this point, you may choose to auto-configure the RAID array by
selecting Auto Setup for Performance or manually configure the RAID
array for stripped sets. If you want to manually configure the RAID
array continue with next step, otherwise, proceed to step #5.
3
Select Select Disk Drives, then press <Enter>. Use arrow keys to
select disk drive/s, then press <Enter> to mark selected drive. An
asterisk is placed before the selected drive.
View Array
Move to the next item
Confirm the selection
Exit
37
Advertisement
Table of Contents
