Table of Contents
Advertisement
32
en | (Optional) Installing a Sunshield
10
(Optional) Installing a Sunshield
Quantity
1
2
2
1
Additional Tools Required
1
1
1
Notice!
Install the applicable accessories (illuminator, sunshield) before you cant the camera.
1.
2.
3.
2019-12 | 1.2 |
Component
Sunshield shell
Screws, M4 x 10
Flat washers
Quick Installation Guide
Phillips-head screwdriver, #2, to remove factory-installed plastic screws from
the camera head
Torx driver, T20, for M4 Torx head screws
Pair of diagonal cutters, to remove the plastic insert for the illuminator from
the sunshield shell, if necessary
If you will install an illuminator on a unit mounted in upright orientation:
Cut out the inset area in the sunshield shell with a pair of diagonal cutters. The inset area
provides space to attach the illuminator. Discard the cut-out plastic.
Note: This step does not apply to cameras mounted in inverted orientation.
Remove the screws from the camera head.
#2 Philips
2x
Attach the sunshield to the camera head.
Installation Manual
MIC IP ultra 7100i │ MIC IP starlight 7100i
Bosch Security Systems
Advertisement
Table of Contents
