WELCOME to the HERGÓM family. We would like to thank you for choosing our ARCE Stove Oven, which represents, in technique and style, a significant improvement on typical log ovens. Your new Oven is, perhaps, the most advanced solid fuel heating system known today. Owning a HERGOM Stove-Oven displays an exceptional sense of quality.
European regulations, • Removable grill. must be applied when installing this device. Oven (upper section) The way the ARCE Stove-Oven is installed will • Steel door with glass ceramic pane and decisively affect safety issues and its correct thermometer.
Page 4
Thermometer and grill FIG. 2 FIG. 3 Installing the cast iron interior lining of the fireplace...
4 - INSTRUCTIONS OF USE Once your oven has been installed and connected to the chimney, you are ready to light the fire. Although your oven is easy to use, the combustion process of solid fuels is complicated, as it involves several factors and it takes time and experience to understand the process.
Page 8
Overheating Overheating means that you have operated your oven a excessively high temperatures for a long period of time. This can damage your unit and, therefore, it is a situation that must be avoided. Overheating is the result of excessive draw, due to any of the following reasons: •...
Page 9
Deflector plate 5 - CLEANING & MAINTENANCE The top of the fireplace is protected by a steel deflector. FRONT, PAINTED STEEL DOORS, SHEET METAL To remove when cleaning of the oven, lift and move COATINGS to the left, then turn and remove it from its Cleaning should be performed when the stove is fixtures.
Page 10
6 - SAFETY WARNING! Gas/log/pellet units get hot when in use. When heating and cooling, this device can produce noises due to the expansion and contraction of its metal parts. Consequently, owners must act with precaution and keep at a distance. Especially keep children, the elderly and other people who require special supervision, as well as pets, away from the appliance when it is in use.
Page 11
7 - ARCE R : MOUNTING THE CORNER Take the part situated inside the combustion chamber and hang it on the two top screws on the back. To achieve this, unscrew the two bottom screws and once in place using the two upper screws, screw on the bottom screws once again.
Page 12
Make the necessary adjustments and tighten all Tighten the two bottom screws. Do not tighten the screws. screws in order to rectify the position when placing the corner piece. Place the corner piece on braces and screw on from below.