Advertisement
THE STOCKWELL II FEATURES A DETACHABLE CARRY STRAP FOR EASY PORTABILITY.
NOTE: ENSURE THAT THE CARRY STRAP IS SECURELY FASTENED ON BOTH SIDES BEFORE USE.
STOCKWELL II IS EQUIPPED WITH AN INTERNAL BATTERY, CAPABLE OF MORE THAN 20 HOURS OF PLAYTIME AT MID VOLUME. FOR OPTIMISED CHARGING, USE A 12 V, 3 A ADAPTER (NOT INCLUDED). THE STOCKWELL II WILL CONTINUE CHARGING WHEN TURNED OFF OR IN STANDBY MODE.
NOTE: THE INDICATOR IS DIMMED DURING NORMAL OPERATION TO SAVE BATTERY POWER. TURNING ANY KNOB WILL MAKE THE INDICATOR LIGHT UP.
THE VOLUME CONTROL ALSO TURNS THE STOCKWELL II ON AND OFF.
MAKE SURE THE VOLUME IS SET TO LOW ON BOTH THE SPEAKER AND THE AUDIO SOURCE BEFORE USING THE SPEAKER.
YOU CAN CONNECT UP TO THREE AUDIO SOURCES TO THE STOCKWELL II SIMULTANEOUSLY, UP TO TWO BLUETOOTH DEVICES AND ONE AUX DEVICE. THE STOCKWELL II DETECTS WHEN A CONNECTED AUDIO DEVICE STARTS PLAYING, AND MAKES IT THE SELECTED INPUT SOURCE.
THE STOCKWELL II CAN BE CONNECTED TO TWO Bluetooth DEVICES AT THE SAME TIME. WHEN TWO Bluetooth DEVICES ARE CONNECTED, PLAYING ONE WILL PAUSE THE OTHER.
THE STOCKWELL II WILL REMEMBER THE LAST 8 PAIRED Bluetooth DEVICES. WHEN MULTIPLE PAIRED DEVICES ARE IN RANGE, THE SPEAKER WILL ATTEMPT TO CONNECT TO THEM IN THE ORDER THEY WERE MOST RECENTLY USED, UNTIL TWO DEVICES ARE CONNECTED.
NOTE: AUDIO CABLES ARE NOT INCLUDED WITH THE STOCKWELL II.
THE STOCKWELL II INCLUDES THREE KNOBS FOR ADJUSTING THE AUDIO.
NOTE: THE VOLUME KNOB IS ALSO THE ON/OFF SWITCH.
IF THE STOCKWELL II IS LEFT UNUSED FOR 10 MINUTES, THE SPEAKER
ENTERS STANDBY MODE TO SAVE BATTERY CHARGE. IN STANDBY MODE ALL BATTERY INDICATORS ARE OFF AND THE SPEAKER NO LONGER RESPONDS TO INPUT FROM ATTACHED DEVICES.
YOU CAN USE THE USB-C INPUT ON THE SIDE OF THE STOCKWELL II TO CHARGE YOUR PHONE, TABLET OR OTHER COMPATIBLE DEVICE. A LEAD WITH USB-C CONNECTOR AND A SUITABLE CONNECTOR FOR YOUR DEVICE IS REQUIRED (NOT INCLUDED). THE STOCKWELL II MUST BE TURNED ON AND HAVE A BATTERY CHARGE OF MORE THAN 2 BARS TO CHARGE AN EXTERNAL DEVICE.
NOTE: CHARGING EXTERNAL DEVICES FROM YOUR SPEAKER WILL REDUCE PLAYBACK TIME.
A FACTORY RESET WILL RETURN THE SPEAKER TO ITS ORIGINAL SETTINGS, EXCLUDING ANY FIRMWARE UPDATES.
NOTE: THIS WILL DELETE ALL USER SETTINGS AND THE SPEAKER WILL NEED TO BE SET UP AGAIN.
NOTE: THIS ILLUSTRATION IS ONLY INTENDED TO SHOW THE INTERNAL SPEAKER LAYOUT. ATTEMPTING TO REMOVE THE FRONT OR REAR GRILLE WILL RESULT IN DAMAGE.
PROBLEM | CAUSE | ACTION |
THE STOCKWELL II DOES NOT TURN ON. | The battery is discharged. | Connect the USB-C lead to the Stockwell II and a USB power adapter. |
THERE IS NO AUDIO | The wrong audio source is selected. | Ensure that the device is connected to the Stockwell II. Check that no other connected device is playing. |
Volume is set too low on either the audio source or the speaker. | Slightly increase the volume on your audio source or the speaker. | |
CANNOT CONNECT OR PAIR WITH A Bluetooth DEVICE | Bluetooth is not enabled on your device (smartphone, tablet, computer). | Activate Bluetooth on your device. |
There are already two devices connected to the speaker. | Disconnect one of the connected Bluetooth devices before connecting to the speaker. | |
The speaker is not in pairing mode. | Push and hold the Bluetooth button for 2 seconds to make the speaker discoverable by the device. | |
Your device prompts you for a pin code. | In most cases, no pin code (password) is needed. If a pin code is requested, use the pin code 0000. | |
THE SPEAKER IS NOT RESPONDING | A software problem has occurred. |
|
Push and hold the Bluetooth button for 7 seconds to reset the speaker to default settings. Note: After this reset the speaker will forget all Bluetooth pairings. | ||
Bluetooth CONNECTION DROPS OUT | The Bluetooth device and the speaker are too far apart or the connection is affected due to obstacles. | Move the devices closer so that they are within 10 metres, and unobstructed by obstacles such as walls or doors. |
There is a strong electric field surrounding the Stockwell II. | Items such as microwave ovens, wireless network adapters, fluorescent lights and gas cookers use the same frequency range as the Bluetooth device. This may lead to electrical disturbances. | |
THERE IS A CRACKLING SOUND | The amplifier is clipping as it has run out of output power. | Decrease the volume on your audio source. |
Decrease the volume or bass on the Stockwell II. | ||
THE AUDIO IS DISTORTED | Volume is set too high on the audio source. | Decrease the playback volume on the audio source. |
The audio stream or audio file is of poor quality. | Try another audio file or music player. | |
Volume is set too high on the Stockwell II. | Decrease the volume on the speaker. | |
Too much bass/treble on the speaker. | Decrease the bass/treble on the speaker. | |
ERRATIC PERFORMANCE | Interference from another electronic device. | Move the Stockwell II to another spot. |
Turn off or move the interfering electronic device. |
NOTES: A Bluetooth DEVICE COULD CAUSE AUDIO-RELATED OR TECHNICAL FAULTS, DEPENDING ON USE, IN THE FOLLOWING CASES:
THIS WIRELESS DEVICE MAY CAUSE ELECTRICAL DISRUPTIONS DURING USE.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Marshall Stockwell II - Portable Loudspeaker Manual
Advertisement
Need help?
Do you have a question about the Stockwell II and is the answer not in the manual?
Questions and answers