Information Codes - Samsung NV7B4355VAK User & Installation Manual

Information codes

If the oven fails to operate, you may see an information code on the display. Check
the table below and try the suggestions.
Code Meaning
C-d1 Door lock malfunctions.
C-20
C-21
Sensor malfunctions.
C-22
C-23
Only occurs during EEPROM Read/
C-F1
Write.
If there is no communication
C-F0
between the main PCB and sub PCB.
Occurs when a communication
C-F2 problem is maintained between the
Touch IC <-> Main or Sub micom.
Button problem
C-d0 Occurs when a button is pressed and
held for a period of time.
FULL MANUAL_NV7B4355VAK_U4_DG68-01418C-00_EN.indd 53 FULL MANUAL_NV7B4355VAK_U4_DG68-01418C-00_EN.indd 53
Action
Turn off the oven and then
restart. If the problem
continues, turn off all power
for 30 seconds or more and
then reconnect. If the problem
is not fixed, please contact a
service centre.
Turn off the oven and then
restart. If the problem
continues, turn off all power
for 30 seconds or more and
then reconnect. If the problem
is not fixed, please contact a
service centre.
Clean the buttons and make
sure there is no water on/
around them. Turn off the
oven and try again. If the
problem continues, contact a
local Samsung service centre.
Code Meaning
If the divider is removed during
cooking in Dual cook mode.
-dC-
If the divider is inserted during
cooking in Single cook mode.
Safety shutoff
Oven has continued operating at
a set temperature for an extended
S-01 time.
• Under 100 °C - 16 hours
• From 105 °C to 240 °C - 8 hours
• From 245 °C to Max - 4 hours
Action
The divider must not be
removed during cooking in
Dual cook mode.
Turn off the oven and then
restart. If the problem
continues, turn off all power
for 30 seconds or more and
then reconnect.
If the problem is not fixed,
please contact a service
centre.
This is not system failure. Turn
off the oven and remove food.
Then try again normally.
English 53
2022-02-22 오전 9:05:29 2022-02-22 오전 9:05:29