Sc-2057 Connection - National Instruments SC-205 Series User Manual

Chapter 9 SC-2057
6
7
8
9
10
1 To VXI-DIO-128
2 Jumper W1
3 To SC-206X, SCXI-116X, SSR Series, or ER-8/16
4 To SC-206X, SCXI-116X, SSR Series, or ER-8/16
5 Product Name

SC-2057 Connection

SC-205X Series User Manual
4
5
Figure 9-1. SC-2057 Parts Locator Diagram
Connect the SC-2057 to the VXI-DIO-128 via a SH96-96, available
separately. Make this connection with the VXI-DIO-128 powered off.
Connect one end of the SH96-96 to either of the 96-pin connectors, P1 or
P2, on the SC-2057 and connect the other end to one of the 96-pin
connectors on the VXI-DIO-128.
The VXI-DIO-128 has a 96-pin connector labeled OUTPUT. The digital
lines from this connector are digital outputs. The VXI-DIO-128 has a
96-pin connector labeled INPUT. The digital lines from this connector are
digital inputs.
1
3 2
6 Assembly Number
7 +24 V, 0.5 A Source
8 +12 V, 0.5 A Source
9 +5 V, 1 A Source
10 Serial Number
9-2 © National Instruments Corporation