Maintenance - Milwaukee FUEL M18 FDG Operator's Manual

MAINTENANCE

To reduce the risk of injury, always
WARNING
unplug the charger and remove the
battery pack from the charger or tool before
performing any maintenance. Never disassemble
the tool, battery pack or charger. Contact a
®
service facility for ALL repairs.
MILWAUKEE
Maintaining Tool
Keep your tool, battery pack and charger in good
repair by adopting a regular maintenance program.
Inspect your tool for issues such as undue noise,
misalignment or binding of moving parts, breakage
of parts, or any other condition that may affect the
tool operation. Return the tool, battery pack, and
charger to a MILWAUKEE
repair. After six months to one year, depending on
use, return the tool, battery pack and charger to a
®
service facility for inspection.If the
MILWAUKEE
tool does not start or operate at full power with a
fully charged battery pack, clean the contacts on
the battery pack.
If the tool still does not work properly, return the
tool, charger and battery pack, to a MILWAUKEE
service facility for repairs.
To reduce the
WARNING
jury and
your tool, battery pack or charger in liquid or
Clean dust and debris from vents. Keep handles
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
combustible solvents around tools.
For repairs, return the tool, battery pack and charger
to the nearest service centre.
ACCESSORIES
Use only recommended accesso-
WARNING
ries. Others may be hazardous.
For a complete listing of accessories, go online to
milwaukeetool.com.au / milwaukeetool.co.nz or
contact a distributor.
®
service facility for
risk of personal
damage, never
Cleaning
Repairs
®
in-
immerse
7