Tape - Recording; Recording Your Favorite Tracks On A Disc Into A Tape; Cd Synchro Recording; Program Edit - Sony MHC-GN660 Operating Instructions Manual

Searching for the beginning of
the current or the next track
(AMS*)
During playback, turn .> clockwise or
counterclockwise (or press >+ or –.
repeatedly on the remote) for the number of
songs you want to skip forward (or backward).
The search direction, + (forward) or
– (backward), and the number of songs being
skipped (1~9) appear in the display.
Example: searching forward 2 songs
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under the
following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.
Tips
• When a tape is inserted, corresponding presence
indicator light up.
• If you press TAPE A/B (or TAPE on the remote)
while the power is off, the power turns on
automatically and TAPE is selected as a function.
• If you press nN (or N on the remote) during
"TAPE A" function and there is no tape in Deck A,
the system automatically switches to "TAPE B"
function when there is a tape in Deck B. Then,
playback will start and vice versa.
• You can also press FUNCTION repeatedly on the
remote to select "TAPE A" or "TAPE B".
20 GB
Tape – Recording
Recording your favorite
tracks on a disc into a
tape

— CD Synchro Recording

You can record a whole disc into a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
1
Load a recordable tape into Deck B.
2
Press CD and load a disc you want to
record.
3
Press CD SYNC.
Deck B standby for recording.
"REC PAUSE/START" indicator flashes.
4
Press DIRECTION repeatedly to select
"g" to record on one side or "j"
(or "RELAY") to record on both sides.
5
Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
To record a disc by specifying
track order

— Program Edit

You can record tracks on all the discs in the
order you want using Program Play. Between
steps 2 and step 3 of "CD Synchro Recording"
(page 20), do steps 2 to 6 of "Creating your own
program" (page 15). When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
Notes
• You cannot listen to other sources while recording.
• Game Mixing does not function during CD Synchro
Recording.