Tape - Play; Loading A Tape; Playing A Tape - Sony MHC-GN660 Operating Instructions Manual

Tape – Play

Loading a tape

1
Press TAPE A/B (or TAPE on the
remote) repeatedly to select Deck A
or B.
2
Press Z A/B on the selected deck.
3
Load a tape into Deck A or B.
With the side
you want to
play/record
facing
forward

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
2
Press DIRECTION repeatedly to select
"g" to play one side, "j"
both sides or "RELAY"
to play both decks in succession.
3
Press nN (or N on the remote).
The tape starts playing.
Press nN (or N on the remote) again to
play the reverse side.
*1
Playback stops automatically after repeating
the sequence for five times.
*2
Relay Play follows this cyclic sequence up to
five times, then stops:
MHC-GN880/GN770 only
Deck A (front side) t Deck A (reverse side)
t Deck B (front side) t Deck B (reverse
side)
MHC-GX9000/GN600 only
Deck A (front side) t Deck B (front side) t
Deck B (reverse side)
Note
MHC-GX9000/GN660 only
You can only playback front side of the tape in Deck A.
Other operations
To Do this
Press x.
Stop playback
Press X. Press X again to resume
Pause playback
playback.
Turn and hold m M clockwise
Fast-forward or
rewind or counterclockwise and release it
at the point you want (or press M
or m repeatedly on the remote).
Z
Remove a tape Press
*1
to play
*2
(Relay Play)
Tape presence indicator
Y j Y
A B
EFFECT
GROOVE LINK
Z
A or B.
continued
19 GB