Playing Repeatedly; Repeat Play - Sony MHC-GN660 Operating Instructions Manual

Notes
• You cannot change the play mode during playback.
• Some time may be needed to start playback of discs
recorded in complex configurations such as many
layers.
• When the disc is loaded, the system reads all the
tracks on that disc. If there are many albums or non-
MP3 audio tracks on the disc, it may take a longer
time for playback to begin or for the next MP3 audio
tracks to start playback.
• You are recommended not to save other types of
tracks or unnecessary albums on a disc that has MP3
audio tracks.
• When naming the MP3 audio tracks, be sure to add
the file extension ".MP3" to the title name.
• An album that does not include an MP3 audio track
is skipped.
• If you put the extension ".MP3" to a track other than
MP3 audio tracks, the system cannot recognize the
track properly and will generate a random noise
which could damage your speaker system.
• The system can playback MP3 (MPEG 1 Audio
Layer 3) audio tracks. The system cannot playback
MP3 audio tracks in format other than MPEG 1, 2
and 2.5 Audio Layer 3 format.
• This system can playback Multi Session discs when
an MP3 audio track is located in the first session.
Any subsequent MP3 audio tracks, recorded in the
later sessions, can also be played back.
• The maximum number of albums on a disc which can
be recognize by this system is 150 (including root
album).
• The maximum number of MP3 audio tracks and
albums on a disc which can be recognize by this
system is 300.
• Depending on the encoding/writing software,
recording device, or the recording media used at the
time an MP3 audio track is recorded, you may
encounter problems such as cannot playback, sound
interruptions and noise.
Tips
• When disc access takes a longer time, set "CD
POWER ON" by CD power manage function
(page 17).
• If you press CD while the power is off, the power
turns on automatically and CD is selected as a
function.
• You can also press FUNCTION repeatedly on the
remote to select "CD".
14 GB

Playing repeatedly

— Repeat Play

You can play all the tracks or a single track
repeatedly on a disc.
Press REPEAT repeatedly during playback
until "REP" or "REP1" lights up in the
display.
REP: All the tracks on the disc(s), or all the
tracks in the album* are played back repeatedly
up to five times.
REP1: A single track is played back repeatedly
until "REP1" is cancelled.
* When "ALBM" or "ALBM SHUF" is selected for
MP3 audio tracks.
To cancel Repeat Play
Press REPEAT repeatedly until both "REP" and
"REP1" disappear in the display.
Notes
• When you select "REP1", that track is repeated
endlessly until "REP1" is canceled.
• You cannot select "REP" and "ALL DISCS SHUF"
at the same time.
Tip
If you set Repeat Play when the playback is stopped,
press REPEAT repeatedly to select the setting, then
press nN (or N on the remote) to start Repeat
Play.