Sony LF-B1 Settings Manual page 5

Creating Basic Settings for
the LocationFree Player
You can register your PSP™ system with the
Base Station and make settings for connection to
a wireless LAN.
1
Turn on the WLAN switch of the
PSP™ system.
2
Select under
menu, and then press the
The setting screen for use of LocationFree
TV is displayed. Press the right button to go
to the next screen.
z
Tip
To re-register your PSP™ system with the Base
Station or to register your system with another
Base Station, you must perform [Basic Settings]
again (1 page 19).
from the home
button.
5
3
Select [Start], and then press the
button.
4
Press the SETUP MODE button on the
rear of the Base Station.
With the Base Station turned on, press and
hold the button until the SETUP MODE
LED starts to blink.
The SETUP MODE LED blinks.
SETUP MODE
LED
Wait while the PSP™ system registers with
the Base Station and the network settings
required for establishing a connection are
completed. This is an automatic process.