Watching TV or Videos Away From Home
Using "Easy Setup" to
Watch TV or Videos
Away From Home
This section explains how to set up your network
to connect to your Base Station at home via
public wireless LAN networks.
• You need to do this setup before you go out.
• A contract or application may be required to connect
to the Internet at some locations.
Checking Your Internet
To watch TV or videos away from home, you
must first connect the Base Station to the Internet.
You can connect the Base Station to the Internet
over a DSL line or cable Internet connection.
• To use the NetAV function to watch TV or videos
away from home, we recommend that the
connection to the Base Station be broadband with
upload and download speeds of at least 300 kbps.
Contact your Internet service provider for more
information about the speed of your
• The faster line speeds you use, the better picture
quality you get when you watch TV or videos using
Connecting to the router
Using a network cable (not supplied), connect the
LAN port of the Base Station to your router.
(1 page 4)
The connection method you should use depends
on your ISP and equipment. For more
information, contact your ISP.
• Depending on your Internet service provider, you
may not be able to connect multiple devices, such as
the Base Station and several computers. For more
information, contact your service provider.
• To determine what kind of network cable to use,
refer to the instructions supplied with your router,
cable modem, or DSL modem.
• For details on setting up the connection, refer to the
instructions supplied with your router, cable modem,
or DSL modem. If you have any questions, contact
your service provider.
• Further information about configurations is also
available on the following website.
LocationFreeTV FAQ pages:
Creating Settings to Watch TV
Away From Home
You need to do this setup before you go out.
Setting Up the NetAV Function
Check that the Base Station is turned
from the control panel
(1 page 9), and then press the
Select [Base Station Settings], and
then press the
The Internet browser is started and the Base
Station Settings screen is displayed. Follow
the on-screen instructions to complete the