• Configuring the wireless settings on a computer
connected to the Base Station over a wired LAN is
recommended to ensure security. If creating settings
for the Base Station from your computer, settings
may differ from those on the PSP™ system. For
details, refer to the Operating Instructions document
supplied with the Base Station.
Using the Base Station as a
wireless LAN access point
You can use the Base Station as a wireless LAN
access point. When using the Internet browser
from the PSP™ system, if you select
[LocationFree AP] from the network connection,
you can connect to the Internet from the PSP™
system through the Base Station.
To use the Base Station as a wireless access point for
computers, the computers must be equipped with
integrated wireless LAN functions or wireless LAN
cards that conform to the IEEE802.11a, b, or g
You can delete registration information for a
device that is registered with the Base Station.
• You need to use [Basic Settings] (1 page 5) to
register your PSP™ system with the Base Station.
For details about registering devices other than the
PSP™ system, refer to the Operating Instructions
document supplied with the Base Station.
• You can register up to four devices (for example, up
to four PSP™ systems) with the Base Station.
It is not possible to watch TV or videos on more than
one of the registered PSP™ systems or computers at
the same time. (At any one time, only one of the
devices may view TV or videos.)
1 A list of the devices currently registered with
the Base Station appears here.
2 If you want to stop connecting to the Base
Station from a registered device, select the
check box for the device in "List of Registered
Devices" and then select [Delete] by pressing