Sony LF-B1 Settings Manual page 15

4
Select [Enter], and then press the
button.
The password input screen appears.
5
Enter the user name and password,
select [OK], and then press the
button.
User name: lfx (lowercase letters)
(The user name cannot be changed)
Initial password: WebPassword printed on
the sticker of the Base
Station
The screen shown in step 6 appears when
you log in to [Base Station Settings].
6
Select [Easy Setup], and then press
the button.
The [Easy Setup] screen appears.
7
Follow the on-screen instructions to
confirm the NETWORK LED is turned
on, select [Next], and then press the
button.
z
Tip
If the NETWORK LED is off, check that the
router is turned on and the network cable is
connected properly.
8
Read the "Dynamic DNS Terms-of-
Use Agreement" included with the
Base Station, select [Agree], and then
press the
The information required for the dynamic
DNS is saved to the Base Station.
z
Tip
Dynamic DNS is one of the network services
used to connect to the Base Station from outside
your home. By selecting [Agree], you can use the
Dynamic DNS service that is registered as part of
the Base Station. If you will not be using this
Dynamic DNS, you can change settings under
[Advanced Settings] (1 page 20).
15
button.