[Sense:]Frequency:external:center - Agilent Technologies 89400 Series Command Reference Manual

Command Reference

[SENSe:]FREQuency:EXTernal:CENTer

Specifies the center frequency of the external downconverter signal.
Command Syntax:
[SENSe:]FREQuency:EXTernal:CENTer <param>
<param>
<number>
<unit>
<step>
<bound>
Example Statements:
OUTPUT 719;":Freq:External:Cent 5.6 MHZ"
OUTPUT 719;"SENSE:FREQUENCY:EXT:CENTER 5E6"
Query Syntax:
[SENSe:]FREQuency:EXTernal:CENTer?
Return Format:
Real
Attribute Summary:
Synchronization Required:
Preset State:
SCPI Compliance:
Description:
This command is effective only when ROUTe:RECeiver is EXT as when using a downconverter
such as the Agilent 89411A. See Help Text (under the Help hardkey) for more information.
334
::= <number>[<unit>]|<step>|<bound>
::= a real number (NRf data)
limits: (depends on configuration)
::= HZ
::= UP|DOWN
::= MAX|MIN
+5.6E+6
instrument-specific
no
command/query