Table of Contents
Advertisement
CALCulate[1|2|3|4]:X:UNIT:FREQuency
Specifies the default x-axis units when the x axis is the frequency domain.
Command Syntax:
CALCulate[1|2|3|4]:X:UNIT:FREQuency HZ
Example Statements:
OUTPUT 719;"Calc4:X:Unit:Freq Hz"
OUTPUT 719;"CALCULATE:X:UNIT:FREQ Hz"
Query Syntax:
CALCulate[1|2|3|4]:X:UNIT:FREQuency?
Return Format:
CHAR
Attribute Summary:
Synchronization Required:
Preset State:
SCPI Compliance:
Description:
The UNIT subsystem is used to change default parameter units. The specified units apply to both
the command and query.
Unit queries must be in the current "family" of units. That is, the CALC:X:UNIT:FREQ? query
should be used only when the default x-axis units are known to be one of the units in the FREQ
units list.
The numbers 1 through 4 used with the CALCulate node specify which trace (A, B, C, or D) is to
be affected by the command. If no number is used in the command line, "CALC1" is assumed and
the command affects trace A.
no
HZ
instrument-specific
Command Reference
command/query
123
Advertisement
Table of Contents
