Table of Contents
Advertisement
CALCulate[1|2|3|4]:X:UNIT:TIME
Specifies the default x-axis units when the x axis is the time domain.
Command Syntax:
CALCulate[1|2|3|4]:X:UNIT:TIME S|SYM|SLOT
Example Statements:
OUTPUT 719;"CALCULATE4:X:UNIT:TIME s"
OUTPUT 719;"calc:x:unit:time sym"
Query Syntax:
CALCulate[1|2|3|4]:X:UNIT:TIME?
Return Format:
CHAR
Attribute Summary:
Synchronization Required:
Preset State:
SCPI Compliance:
Description:
The UNIT subsystem is used to change default parameter units. The specified units apply to both
the command and query.
S specifies units of seconds and SYM specifies units of symbols, as defined for digital
modulation.
Unit queries must be in the current "family" of units. That is, the CALC:X:UNIT:TIME? query
should be used only when the default x-axis units are known to be one of the units in the TIME
units list.
The numbers 1 through 4 used with the CALCulate node specify which trace (A, B, C, or D) is to
be affected by the command. If no number is used in the command line, "CALC1" is assumed and
the command affects trace A.
The SLOT unit is only allowed in the W-CDMA instrument mode.
no
HZ
instrument-specific
Command Reference
command/query
125
Advertisement
Table of Contents
