Download Print this page

Fisher & Paykel DD60DAHX9 Troubleshooting page 4

Advertisement

Problem
Fan noise starts up when I
close the drawer, even
though I didn't start a new
wash
No powdered detergent
dispensed
The wash program seems
to have finished (the
dishwasher is idle), but the
end of wash beeps haven't
sounded and the drawer
cannot be opened
Water pooling on inner rim
of drawer after a wash
Water under the drain filter
Excess water in the drawer
Water marks on the dishes
Drawer interior is stained
Dishes did not dry
https://producthelp.fisherpaykel.com/eu/Clean/DishDrawer%E2%84%A2/Double/DD60DAHX9/User_Guide_DD60DAHX9/13_...
Possible Cause
This is normal. In some
cases, the drying fan will
run whenever the
drawer is closed for a
set period of time after a
program has finished.
Detergent dispenser
was wet when loaded.
The wash program is
still underway. It is in a
'quiet' phase that is
needed for ensuring the
best wash results.
This is normal
condensation.
This is normal and needs no action.
Drain hose(s) bent or
kinked.
Blocked filters.
Rinse aid depleted.
Rinse aid setting too
low.
Dishwasher overloaded/
incorrectly loaded.
Some foods, like tomato
based products, may
stain the inside of the
drawer.
Dishes did not dry
Dishes were left in the
What to Do
No action required. The fan will automatically stop
after the set time is over.
Clean the dispenser and ensure it is dry before
adding detergent.
No action required. The program will transition into
a more audible phase after the 'quiet' phase is
over.
Wipe dry.
Straighten the drain hose(s).
Clean the filter plate/drain filter. Refer to
maintenance
instructions'.
Refill the rinse aid dispenser.
Increase the rinse aid setting.
Refer to the section on loading.
Pre-rinse dishes before placing in the drawer.
Alternatively, using the Rinse program after adding
the dishes may minimize staining.
Ensure the dishes are not nesting together.
We recommend unloading the dishes within a few
Updated: Wed, 06 Sep 2023 03:43:20 GMT
'User
Powered by
4

Advertisement

loading